Fenders

Mudguard in pure form: EDGE AL guarantees city and trekking cyclists ideal splash protection on the road. This aluminum mudguard mounts close to the tire and offers great stability, although it is only attached at three points. No load rack is necessary to attach EDGE AL. With a purist matte-black look and an angular profile, EDGE AL integrates itself almost invisibly into the frame. - Urban fender set - Sturdy aluminum profile design for urban bikes - Black U-stay - Includes accessory parts and stays - Weight: 568g

Just the thing for rainy weather, the Portland Design Works minimalist Origami Rear Seatpost Fender attaches to a clamp-on bracket you mount to your seatpost. And it packs down so you can easily store it when not in use. - Length: 445mm (7.5") - Weight: 160g (5.6oz)

The X-Blade 27.5+/29-inch is a high-quality 2-component clip-on fender for the rear wheel of a 27.5+/29-inch mountain and trekking bikes. Due to the quick-release mounting, the fender can be fitted to almost any seat post and optimally adjusted to the wheel using the 2-joint technology. - High performance dual compound plastic - Easy quick-release-fastening by pre-adjusted powerstrap - 2 joints for optimized adjustment to all frames - Optimized dirt protection - 27.5+ and 29-inch wheel compatible

No matter the conditions, stay dry and clean with SKS's X-Tra Dry rear fender! It's super light and nearly unbreakable so you know it's ready for the miles, on road and off. Plus, it works with most bikes thanks to its easy-to-adjust seatpost mounting strap.

Turn your bike into an all-weather vehicle with SKS's Beavertail Fender Set! The robust steel brackets provide safe and easy mounting, and the front fender works with most suspension forks.

The Shockblade 26/27.5-inch is a clip on front, high-quality 2-component fender for mounting on the fork of 26-inch and 27.5-inch mountain and trekking bikes. - Virtually unbreakable high quality dual compound plastic - Hidden chuck cone adapter which is fitted once during first assembly - Easy quick-release fastening - Optimized dirt protection - Fits almost all suspension forks - 26-inch and 27.5-inch wheel compatible

The Shockblade 27.5+/29-inch is a clip-on front, high-quality 2-component fender for mounting on the fork of 27.5+ and 29-inch mountain and trekking bikes. - Virtually unbreakable high quality dual compound plastic - Hidden chuck cone adapter which is fitted once during first assembly - Easy quick-release fastening - Optimized dirt protection - Fits almost all suspension forks - 27.5+ and 29-inch wheel compatible

The SKS SPEEDROCKER has been specifically developed for compatibility with gravel and adventure bikes, cyclocross bikes and road bikes with tyres exceeding 32mm. Proudly Made in Germany, the Speedrocker offers incredible stability over the roughest tracks while also providing optimum protection in all weathers. - Rear fender expands for custom fit - Rubber fasteners mount to a variety of frame styles

Accessorize your ride while keeping yourself dry at the same time. - Front and rear full length fenders designed for use on Townie 26" bicycles ONLY - Fits both men's and ladies' 26" Townie models - Protects against splashes - WILL NOT FIT Tall Townie Mens Bicycles or 24" Townie bicycles

Functional. Fashionable. Fenders. Keep you and your threads clean and dry by adding stylish fenders. - Front and rear full-length fenders designed for use on Townie Path bicycles - Fits both Step-Thru and Step-Over Townie Path models - Compatible with tires up to 2.35-inch wide - Protects against pesky mud and splashes

A pair of Electra's Townie Aluminum Fenders on your ride will let you pedal even in less-than-ideal conditions. They're made from durable, low-maintenance aluminum and offer full coverage so you'll arrive squeaky clean. All mounting hardware is included for quick and easy installation.

Topeak's DeFender M1 front fender offers durable rain and mud protection on wet and sloppy rides for your 27.5- or 29-inch wheeled bike. It's incredibly light and easy-to-use, too. The M1 installs easily to any standard fork, even reverse arch designs and seamlessly integrates with the front end of your bike. The quick-release attachments allow the DeFender to be installed and removed in seconds.

Wet weather is no worry when you've got Electra's Cruiser Essential Aluminum Fenders. They're made from durable, low-maintenance aluminum and offer full coverage so you'll arrive squeaky clean. All mounting hardware is included for quick and easy installation.

Topeak's DeFender RX rear fender offers durable rain and mud protection on wet and sloppy rides. It's incredibly light and easy-to-use, too. The quick-release seatpost attachment allows the DeFender to be installed and removed in seconds.

Wet weather is no worry when you've got Electra's Cruiser Essential Aluminum Fenders. They're made from durable, low-maintenance aluminum and offer full coverage so you'll arrive squeaky clean. All mounting hardware is included for quick and easy installation.

Topeak's DeFender M2 rear fender offers durable rain and mud protection on wet and sloppy rides. It's incredibly light and easy-to-use, too. The quick-release attachment fits most seatposts and allows the DeFender to be installed and removed in seconds. Plus, the 2-pivot arm is super adjustable for better coverage and a perfect fit on any bike.

- Attaches to saddle rails - Quick and easy to install and remove - Fat Butt, a wider version for fatbike applications - Road/CX narrower for road and cross bike applications

Easy-to-install rear fender for your fat bike. CONSTRUCTION • Virtually unbreakable polypropylene body MOUNTING SYSTEM • Adjustable rubber straps mount to down tube • 100% recyclable • Ships and merchandises as a flat sheet and snaps onto the included seat tube bracket • Hardware included • Weight: 190 grams / 6.7 ounces

The VELOFLEXX mudguard set combines the stability of a fixed mudguard with the flexibility of a clip-on mudguard. The VELOFLEXX bridge allows the rear mudguard to be attached at the top of the seat stay with the use of rubber straps—no tools needed. This method of mounting doesn't rely on the cross stay where the caliper brake is usually bolted. At the front, the VELOFLEXX is mounted to the fork bridge with a rubberized hook-and-loop fastener or a cable tie. The black-coated stays provide even greater support. - Compatible only with disc brakes - Includes hook-and-loop fasteners and tension rubber

Spice up your eBike with an Electra fender set. - Front and rear full-length fenders designed for use on Townie Path Go! eBikes - Fits both step-thru and step-over Townie Go! models - Will not fit other Townie bike models - Protects against pesky mud and splashes

Lightest and most versatile MTB mud guard available. - Uses hook and loop Velcro straps to attach to the bridge and lower legs - Compatible with forward and double bridge fork designs and all wheel sizes - XL version is longer and provides more coverage - Reverse version is designed for forks with reversed bridges - Fat Face Fender MV0035 updated to be compatible with FatBike suspension forks - Fat Face Fender XL, you guessed it, extra wide for FatBike applications

These fenders feature an art-deco, zeppelin profile and are available in high polished silver and smooth Noir. They're 52mm wide for 650b wheels with tires up to 44mm wide. They are 52mm wide for 700c and 27" wheels, and work with tires up to 42mm wide. We include a hardware kit to work with almost any type of mounting in the same finish as the fenders. - Fenders are made from aluminum alloy for strength while staying lightweight - Rear fender is 120cm long and the front is 90cm long - Both come pre-drilled for stays. Front is pre-drilled for a fork crown mount - Hardware kit includes: 5mm polished aluminum stays, R-clips and screws, L bracket, reinforcement plates, stay-to-fender closed - eyelet bolts, fork crown daruma, sliding bracket, leather washers, and detailed installation instructions - Velo Orange fenders are designed to be full coverage, which means that you and your bike's drivetrain will stay clean of road muck and grime. Both front and rear fenders have full wrap around the width of your tires to eliminate spray in all directions. Please note: We include most if not all of the hardware you need for the installation of our fenders on the vast majority of bikes, but in that the kit is as universal as possible, you may need one or two bits of hardware for your particular build. Read the instructions to make sure your frame and fork has the correct mounts and hardware needed.

Portland Design Works' neat Sodapop Fenders are made from 97% post-consumer recycled bottles. They pop on and off with ease, keep you dry in the rain, and get one back for the planet, too! - City width: 48 mm at tail - Mountain width: 64 mm at tail

Portland Design Works has given the original fat bike front fender a facelift! The Mud Shovel 6.5 Front Fender was designed specifically for fat bikes - they're extra long and wide to block the muck, snow, or sand you'll ride through on your next fat bike adventure. Made of heavy-duty polymer, the Mud Shovel 6.5 Front Fender is super lightweight but sturdy enough to take years of bad weather abuse. The fender mounts to the downtube of your bike using adjustable rubber straps for a secure fit. - Front fender is 254mm wide and 622mm long (10" x 24.5") - Extra-long, wide design blocks snow, water and sand - Bracket keeps fender super stable and is easy to install - Built with lightweight, sturdy materials for durability

Stay clean and dry with SKS's Velo 47 Trekking fenders! The universal mounting system attaches easily to most framers to give you full coverage from road spray. These fenders fit tires from 37 to 62mm wide.

Lightweight and stealthy, Muc-Off Ride Guards keeps mud fling to a minimum. - Guards against mud - Made from 100% recycled plastic waste - 100% recyclable - Supplied with 4 zip ties - Made in England

Simple solution to keep the spray down when the weather turns nasty - Attach to the fork crown and legs with zip ties - Compatibility: universal - Width: 120mm - Color: black - Weight: 20g

Topeak's DeFender M1 front fender offers durable rain and mud protection on wet and sloppy rides for your 26-inch bike. It's incredibly light and easy-to-use, too. The M1 installs easily to any standard fork, even reverse arch designs and seamlessly integrates with the front end of your bike. The quick-release attachments allow the DeFender to be installed and removed in seconds.

- Attaches to the down tube using the supplied fasteners - Quick and easy to install and remove - Fat Gut Fender, the perfect fit for fatbike applications

•Classic look with full stainless steel Construction •Quick adjust multi-fit stay system •Stainless steel mounting hardware