Parts & Accessories

On a lot of frames, the bottle cage mounts just aren’t in the right place. If your bottle cage isn’t playing nice with your other accessories, Problem Solver's height-adjustable adapter might do the trick. With 45mm of fore-to-aft adjustability, you should be able to find the optimal position for your cage. -45mm of adjustability -28 oz water bottles max -Constructed of AL-6061

Increase your hydration capacity with Origin-8's HydroRail Double Seat Bracket. This bracket mounts to your saddle rails and holds two bottle cages. And, the angle is fully adjstable so you can customize it to keep your bottles within easy reach. Bottles and cages sold separately.

• AERODYNAMIC LOCATION - Mounts to saddle, hiding in body’s draft • HIGHLY ADJUSTABLE - Can adjust cage angle and cage height for a perfect custom position • STABLE DESIGN - Stiffest mount on market with alloy arms • FLARED CAGE DESIGN - Makes inserting bottle easy • HIGHEST GRIPPING CAGE - 14 lbs grip on bottle to prevent bottle launches • ANTI-VIBRATION - Locking hardware for safety and security • REPAIR STORAGE OPTIONS - Compatible with AERO POUCH 300 BAG or MULTI-STRIKE REPAIR HOLDER (each sold separately) • Aircraft aluminum mount • Carbon fiber bottle cage • Weight: 141.5 grams Why single rear carriers? • Replaces frame bottle: Standard frame-mounted bottles have high aerodynamic drag, so place your bottle at the rear instead. The DELTAs are mounted on the saddle rails for no measurable drag. • Refills front drink system: Use the DELTAs to refill a front drink system. Just bring the spare bottle forward from the DELTA and refill. If you have the popular XLAB TORPEDO aerobar mounted system (sold separately), then simply replace the empty front bottle with the spare bottle from the DELTA. • Adds an extra bottle: These systems are also ideal for longer training rides or century rides, where an extra bottle is necessary so you can have your favorite mix with you at all times.

If your thread inserts are already blocked or your bike does not even have any, the TWIST products can be mounted to the bike with the TWIST uni base, the universal bottle holder. It can securely fastened with the aid of two zip ties. On the top tube, the down tube, or the saddle tube – the TWIST uni base can be attached anywhere on the frame. - Compatible with frame tubes with a width of 28-62 mm - Rubber back for frame protection - Compatible with all TWIST Bottles - Attach and detach with ease

BiKASE's Handlebar/Seat Post Bottle Cage Bracket makes it easy to attach a bottle cage and bottle (both sold separately) to your handlebars or seat post. It's made of durable engineered plastic polymers and includes shims and hardware to fit on handlebars and seat posts with 24 to 32mm diameters or 32mm to 43mm diameters. It also rotates so you can set the bottle where you want it for easy access. • Material: POM head, PP bracket, Stainless steel hardware • Size: 8cm x 6cm x 2cm • Weight: 40 g • Fits handlebar 24mm-32mm • Versatile bracket rotates

XLAB's Turbo Wing Rear Carrier delivers options galore so you can easily attach bottles, a bag, CO2 cartridges, and everything else you need for any length ride, and keep it all neatly tucked behind you, out of the wind. There are also 15 different mounting options and you can keep it upright for low drag or invert it for easy access. Plus, it's made of light, strong aluminum, which means there's no twisting under load, no swaying while riding and no bouncing or lost bottles over bumps.

Profile Design bottle cage storage securely and conveniently uses your bottle cage as a cargo carrier. The screw-top, bottle-shaped containers carry necessities—whatever you need along the way.

Introduction - Our Hydration and Repair carriers have often been copied, but like any copy, it is never as good as the original. With over a decade of experience designing these carriers and winning more Ironman Distance World Championships than all our competitors combined, we have launched the first of the next generation of Alloy XLAB Hydration Carriers. This new 'wing' will be on winning race rockets for the next several years. - Rear carriers should not interfere with the air on the rider's back, but instead fill in the turbulence 'hole' behind the riders posterior, thereby reducing the rider's drag (which accounts for 64% of energy used on a racing bicycle). We positioned the carrier in the Wind Tunnel to 'draft' behind the rider causing no extra drag. Storage - We wanted the next generation of carriers to solve the problem of storing keys, cell phones, cash, tire levers, and other essential items. These and other items can be stored in the XLAB MINI BAG which drops vertically and easily into the integrated compartment and is secured by the top X-STRAP. - As you can see, you have two choices for storing your Air Strike CO2 cartridges and NANOFLATOR, or XLAB SPEED CHUCK on the rear of the CARBON WING, using the optional hexagonal X-NUT or in the XLAB MINI BAG. - Tires and tubes are always an issue, so now you can attach them neatly under the CARBON WING inside the XLAB MEZZO BAG. Hydration - With the CARBON WING you can use a single Aqua Shot bottle cage on the rear or one on each side. XLAB recommends using either the GORILLA cage or the GORILLA XT cage for rear carriers. Adjustable Mounting - One of the key features invented by XLAB is the multiple mounting holes for the saddle rail clamps. One position sets the bottle cages close to vertical and others incline the cages for rider preference. Because of it's past success, we have kept the same feature in the XLAB Super Wing for customizing the installation. - In addition, there are 4 sets of holes for the lower cage bolts which with the front holes provides a total of 12 different cage angle positions. Lightweight - We use the latest aerospace aluminum alloy to provide the toughest alloy carrier on the market with no twisting like other hydration carriers. Without hardware the XLAB Super Wing weighs only 85 grams. Bottom Line - The bottom line—simply the most versatile Alloy Hydration and Repair system carrier, complete with mounting hardware. XLAB makes you faster – ask the Pros! Includes: - Carbon Sonic chassis - One Pair X-Straps - All hardware and instructions Material - Carbon Fiber proprietary unidirectional orientation. Weight - Chassis 49 grams, Hardware 30 grams. Total 79 grams Limited Lifetime Warranty - Because of our engineering and testing for this product we give it a Limited Lifetime Warranty to the original owner.

The Delta 425 is among the lightest and stiffest, adjustable single rear bottle carriers on the market. Compatible with ISM saddles. The Delta 425 mounts to the saddle rails and hides in the body's draft. Angle and height are highly customizable for that perfect fit. It includes a tight-gripping Gorilla XT carbon fiber cage for a secure hold.

- Handlebar cage mounting bracket allows any bottle cage to be firmly attached to handlebars - Compatible with handlebars from 22mm to 36mm

Bottle cage support for fitting on frames that don’t have specific fixing holes, or to increase the standard number of bottle cages. Compatible with tubes having diameter from 25 mm to 70 mm (from 1 to 2.8 inch)

The Wolf Tooth Bottle Shift is designed to offset a bottle to a more optimal location and make it possible to also mount a pump on frames with large downtubes. It is most commonly used on dual suspension frames where the water bottle is difficult to access because of interference with the top tube or shock. By shifting the bottle slightly off center and tilting it outward, clearance is greatly improved. - Slots and extra tapped holes in the mount provide 18mm of bottle position adjustment - Designed to be easily flipped to provide either left or right hand bottle access - Centerline of the bottle moves 18mm with the combined 10 degree tilt and 9 mm offset - Offset of pump bracket mounting holes allows mounting mini pumps on most mountain bikes

B-RAD Everywhere Base 2

This water bottle enclosure is designed to insulate and prevent water from freezing when riding in cold conditions. - Waterproof, 5.5mm neoprene construction with nylon lamination inside and outside - Includes: plastic cage, Allen key, screws and washers - Fits and encloses up to an average 20oz bottle and has enough room for a heat pack - Extended zipper pull for easy open close while riding with winter gloves - Reflective material on logo

Solid aluminum dropper post mount to attach rear bikepacking bag, larger saddle bag, bottle cage, tail light, and more.

Aluminum BTA hydration mount compatible with Torpedo Versa (sold separately). Pre-drilled front mounting holes for Torpedo Versa or aero computer mounts. - Adjustment Width: 75-150mm - Construction (Plate): 6061-T6 Aluminum - Construction (Brackets): Nylon composite with Velcro straps coated with no-slip extension grip - Weight: 1.9oz (55g)

Ortlieb O-Strap Adjustable Rubber Strap - 190mm - Black - Soft material keeps items secure and helps prevent scratching

Staying hydrated is basic safety! Mental and physical performance drops quickly when you run out of liquids. Stay hydrated and stay fast with this hands-free hydration kit.

Keep your handlebar organized and your devices secure with the SGS-400-STD (22.2/25.4/28.6mm) from Minoura. - Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.) - Lightweight and rustproof alloy construction - New LW-Clamp reduces weight 25 grams compared to previous models - Aluminum bar is position adjustable and uses Hex Bolt to install and remove - 22mm-29mm diameter

TWIST Bottle Connector for TWIST 450, 590, 600, and 750 Bottles. Not compatible with TWIST 800 or KEEGO Bottles. Easily attach your new connector by placing it in the Connector indent on your Bottle and locking it in with a coin. Replace your connector on your existing set or add to a Replacement Bottle. - Compatible with TWIST 450, 590, 600, and 750 Bottles - Not compatible with TWIST 800 or KEEGO Bottles - Compatible with all TWIST Bases: Bike Base, Tex-Base, and Uni-Base

Switch your TWIST Bottle from bike to bike with an extra TWIST Bike Base. Includes TWIST Bike Base and screws for mounting to standard braze-ons. Make sure to use the provided screws when attaching your Bike Base. Compatible with all TWIST Bottles. - Includes TWIST Bike Base and screws for mounting to standard braze-ons - Compatible with all TWIST Bottles

Upgrade your adventure with the TWIST Universal Connector + Bike Base. By combining the TWIST magnetic system you love with the Boa® Fit System, any bottle turns into a Fidlock bottle. Use this system to carry your hydration, energy bars, or even your speaker for some tunes on the trail. Includes TWIST Bike Base and screws for mounting to standard braze-ons. Make sure to use the provided screws when attaching your bike base. TWIST Universal Connector with Boa - Compatible with all TWIST Bases - Can hold items with a diameter of up to 80mm/3.14in - Anti-slip inlay for strong hold TWIST Bike Base - Compatible with all TWIST Bottles

B-RAD Everywhere Base 3

Featuring a three-color Park Tool logo and "bike wrench" graphic, Park Tool's Pint Glass is made from heavyweight, dishwasher-safe glass.

SKS's Cage Box offers light, simple storage for your on-the-go essentials. With enough room for your tools, mini pump, and a tube, the Cage Box slides easily into your water bottle cage for a rattle-free, easy access storage solution.

Make quick work of any bottle-cap-removal operation with Park's BO-2 Bottle Opener. This ergonomic tool is made of stainless steel with a comfy vinyl coating.

Thanks to the modular TWIST system an exchange of the single parts is done in no time. If base and replacement bottle are still at hand, the TWIST bottle connector is also available separately. The bottle connector is suitable for all TWIST bottles with a belt as well as TWIST bases. Fitting the new connector is simple: insert the connector into the recess of the TWIST replacement bottle and lock with a coin. - Suitable for all TWIST bottles with a belt - Fits all TWIST bases

Being elite means making no compromises when pursuing perfection...everything matters. Mounting your gear in a position to minimize drag is just one tip for performance. The Tri-BackUp Elite is specifically designed for saddles with angled rear rails. - Material: CNC aluminum - Hydration Capacity: One or two bottles (up to 750cc each) - Compatibility: Ninja TC Road, Ninja Pouch+ Road Ninja CO2+ Tri-Cage series - Mount: V rail section of saddle Compatible with CrMo, Ti, & Carbon rails - Max Load: 2.5 kg / 5.5 lb - Added Features: 1 Micro AirBooster and 2 16g CO2 cartridges included - Angle adjustable - Size: 8.6 x 7.6 x 7.4 cm / 3.4” x 3” x 2.9” - Weight: 102 g / 3.60 oz (Total) 88 g / 3.10 oz (w/o Inflator Bracket)

Saving time wherever possible is important to a triathlete and the Tri-Backup Pro V aids by mounting to the “V” section of your saddle to form a rear saddle hook helping to minimize T1 and T2 times. This sturdy rack also provides multi-combo capabilities to customize equipment for any race needs. - Material: Pressed aluminum - Mount: V rail section of saddle Compatible with CrMo, Ti, & Carbon rails - Hydration Capacity: One or two bottles (up to 750cc each) - Max Load: 2.5 kg / 5.5 lb - Compatibility: Tri-BackUp Air Station, Tri-BackUp TubeBag, Tri-BackUp TireBag, Ninja TC Road, Ninja Pouch+ Road. Ninja CO2+ Tri-Cage - Added Feature: 2 angle positions - Size: 11.8 x 8 x 6.9 cm / 4.6” x 3.1” x 2.7” - Weight: 97 grams

Tri-BackUp series is a complete system that Topeak has carefully integrated storage, hydration and repair into one solution for triathletes. The Tri-BackUp Air Station is an adapter for mounting a CO2 inflator, CO2 cartridges, and a mini pump. - Material: Engineering grade plastic - Compatibility: HybridRocket RX, RaceRocket HP Carbon, RaceRocket HP, Micro AirBooster, - Two 16g CO2 cartridge - Mount: Works w/ TRI-BackUP Elite / Pro V / Pro I - Size: 10.3 x 8.6 x 3.3 cm / 4.1” x 3.4” x 1.3” - Weight: 30 grams / 1.06 oz *Mini pump, CO2 inflator, CO2 cartridges & Tri-Cage not included