Write Us a Review
Skip to main content
Zippy's Bike ShopZippy's is family owned and operated!Free lifetime tuneups with bikes from Zippy's!Zippy's AddressZippy's bikes phone numberOnly 3.5% tax at Zippy's Bike Shop!

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Accessorize Your Ride

$82.00
These fenders feature a classic, fluted profile and are highly polished. They're 63mm wide, designed for 700c wheels, and work with tires up to 55mm wide - the sweet spot for touring and city bikes. We include a hardware kit to work with almost any type of mounting in the same finish as the fenders. - Fenders are made from aluminum alloy for strength while staying lightweight - Rear fender is 120cm long and the front is 90cm long - Both come pre-drilled for stays. Front is pre-drilled for a fork crown mount - Hardware kit includes: 5mm polished aluminum stays, R-clips and screws, L bracket, reinforcement plates, stay-to-fender closed eyelet bolts, fork crown daruma, sliding bracket, leather washers, and detailed installation instructions - Rear fender is crimped just above the chainstay mount to allow use of a front derailleur - Velo Orange fenders are designed to be full coverage, which means that you and your bike's drivetrain will stay clean of road muck and grime. Both front and rear fenders have full wrap around the width of your tires to eliminate spray in all directions. Please note: We include most if not all of the hardware you need for the installation of our fenders on the vast majority of bikes, but in that the kit is as universal as possible, you may need one or two bits of hardware for your particular build. Watch this video and read the instructions to make sure your frame and fork has the correct mounts and hardware needed. If you need additional hardware, check out this page.
$82.00 - $89.00
These fenders feature an art-deco, zeppelin profile and are available in high polished silver and smooth Noir. They're 52mm wide for 650b wheels with tires up to 44mm wide. They are 52mm wide for 700c and 27" wheels, and work with tires up to 42mm wide. We include a hardware kit to work with almost any type of mounting in the same finish as the fenders. - Fenders are made from aluminum alloy for strength while staying lightweight - Rear fender is 120cm long and the front is 90cm long - Both come pre-drilled for stays. Front is pre-drilled for a fork crown mount - Hardware kit includes: 5mm polished aluminum stays, R-clips and screws, L bracket, reinforcement plates, stay-to-fender closed - eyelet bolts, fork crown daruma, sliding bracket, leather washers, and detailed installation instructions - Velo Orange fenders are designed to be full coverage, which means that you and your bike's drivetrain will stay clean of road muck and grime. Both front and rear fenders have full wrap around the width of your tires to eliminate spray in all directions. Please note: We include most if not all of the hardware you need for the installation of our fenders on the vast majority of bikes, but in that the kit is as universal as possible, you may need one or two bits of hardware for your particular build. Read the instructions to make sure your frame and fork has the correct mounts and hardware needed.
$89.00
These fenders feature a classic hammered pattern and are available in high polished silver and smooth Noir. They're 45mm wide, designed for 700c and 27" wheels, and work with tires up to 35mm wide. We include a hardware kit to work with almost any type of mounting in the same finish as the fenders. - Fenders are made from aluminum alloy for strength while staying lightweight - Rear fender is 120cm long and the front is 90cm long - Both come pre-drilled for stays. Front is pre-drilled for a fork crown mount - Hardware kit includes: 5mm polished aluminum stays, R-clips and screws, L bracket, reinforcement plates, stay-to-fender closed eyelet bolts, fork crown daruma, sliding bracket, leather washers, and detailed installation instructions - Velo Orange fenders are designed to be full coverage, which means that you and your bike's drivetrain will stay clean of road muck and grime. Both front and rear fenders have full wrap around the width of your tires to eliminate spray in all directions. Please note: We include most if not all of the hardware you need for the installation of our fenders on the vast majority of bikes, but in that the kit is as universal as possible, you may need one or two bits of hardware for your particular build.
$27.90
- Stainless steel cage with 24 ounce screw top bottle - Cage Velcros on any size frame tube or seat post
$28.50
Our vinyl-coated cage is specifically designed for holding the taller stainless steel bottles, without scratching or rattling. Its straight-back design allows the bottle to rest comfortably and securely in the cage. - Stainless steel cage with a black vinyl coating - Fits any size frame tube or seatpost with a Velcro strap - Will not scratch metal bottles or remove paint - TF-41 is capable of holding bottles up to 24oz - TF-42 is capable of holding standard Nalgene bottles - Made in the USA
$34.95
The Quick Cage 3-bolt Adapter is made from high-impact nylon with stainless steel inserts and is designed to hold any 2 or 3-bolt cage, such as the Anything Cages by King Cage, Salsa, and Blackburn. Stuff sacks, sleeping rolls, tents, as well as extra-large water bottles are all game.
$37.00
Our vinyl-coated cage is specifically designed for holding the taller stainless steel bottles, without scratching or rattling. Its straight-back design allows the bottle to rest comfortably and securely in the cage. - Stainless steel cage with a black vinyl coating - Fits any size frame tube or seatpost with a Velcro strap - Will not scratch metal bottles or remove paint - TF-41 is capable of holding bottles up to 24oz - TF-42 is capable of holding standard Nalgene bottles - Made in the USA
$35.00
This stainless steel, insulated iteration of the well-loved Podium bottle keeps your hydration cold without holding you back. Keep your chill Tough enough to tackle any ride, the Podium® Steel is built for life on and off the road. Made from premium 18/8 stainless steel, this sleek bottle combines rugged durability with a streamlined design that's always close at hand but stays out of your way. The double-wall vacuum insulation keeps your beverages cold for your entire ride, and the lightweight construction strikes the perfect balance between agility and reliability. Product details: - Made with safer chemicals, designed to preserve resources and diminish disposables - Double-Wall Vacuum Insulation - Temperature defying chill - Lightweight Design - So lightweight you might forget it's there - Hours Cold - 18 hours - No Squeeze Required - Just grab, lift, and sip - 18/8 Stainless Steel - Tough as nails, but doesn't taste like them - High-Flow Cap - Logic-defying sipping ease - Leakproof Lockout - No spills, all thrills Features: Easy Drinking Stay focused on crushing your ride – not your bottle. Podium's high-flow cap means there's no squeezing necessary to get maximum hydration. Just grab, lift, and sip! Tired of plastic? Ditch your plastic water bottles for the CamelBak stainless steel and titanium bottles that are built to stand the test of time. Stainless steel vs. titanium Both bottles will be long-lasting and easy to clean, so which do you choose? Easy! The titanium bottles are lighter weight and the stainless steel bottles offer more durability while keeping your water colder for longer.
$40.00
This stainless steel, insulated iteration of the well-loved Podium bottle keeps your hydration cold without holding you back. Keep your chill When you're charging uphill, you need hydration that's close at hand but stays out of your way. The Podium® Steel 22oz is made from premium 18/8 stainless steel with a sleek design and expanded capacity so you can carry more water without ever slowing down. The double-wall vacuum insulation keeps your beverages cold for your entire ride, and the lightweight construction strikes the perfect balance between agility and reliability. Product details: - Made with safer chemicals, designed to preserve resources and diminish disposables - Double-Wall Vacuum Insulation - Temperature defying chill - Lightweight Design - So lightweight you might forget it's there - Hours Cold - 18 hours - No Squeeze Required - Just grab, lift, and sip - 18/8 Stainless Steel - Tough as nails, but doesn't taste like them - High-Flow Cap - Logic-defying sipping ease - Leakproof Lockout - No spills, all thrills Features: Easy Drinking Stay focused on crushing your ride – not your bottle. Podium's high-flow cap means there's no squeezing necessary to get maximum hydration. Just grab, lift, and sip! Tired of plastic? Ditch your plastic water bottles for the CamelBak stainless steel and titanium bottles that are built to stand the test of time. Stainless steel vs. titanium Both bottles will be long-lasting and easy to clean, so which do you choose? Easy! The titanium bottles are lighter weight and the stainless steel bottles offer more durability while keeping your water colder for longer.
$29.95
Topeak's DeFender M2 rear fender offers durable rain and mud protection on wet and sloppy rides. It's incredibly light and easy-to-use, too. The quick-release attachment fits most seatposts and allows the DeFender to be installed and removed in seconds. Plus, the 2-pivot arm is super adjustable for better coverage and a perfect fit on any bike.
$29.99
Topeak's Modula Java Cage carries your 12 or 16 ounce coffee cup with ease, so you can bring your favorite hot beverage along for the ride. It grabs securely with a rubber strap and adjusts to fit most insulated mugs.
$34.95
Topeak's HighLite Combo II is a lightweight set with plenty of power. The WhiteLite II headlight boasts 3 super-bright white LEDs with blinking and steady modes sure to catch the attention of drivers and other riders. And, the RedLite II taillight provides 4 LEDs worth of lighting power with steady and flashing modes. Best of all, neither light requires hardware to mount. Batteries are included.
$37.95
Topeak's DeFender XC11 for 29ers is a rear fender that offers durable rain and mud protection on wet and sloppy rides. It's incredibly light and easy-to-use, too. The quick-release seatpost attachment allows the DeFender to be installed and removed in seconds and the angle is adjustable for the perfect fit.
$39.95
Specifically designed for 27.5” and 29” wheeled MTB’s. The DeFender front and rear fenders are the perfect choice for lightweight durable mud protection on those wet and sloppy rides. Quick release allows DeFenders to be installed and removed in seconds. A highly polished underside helps prevent dirt buildup and aids in cleaning. Fits 27.5” – 29” MTB tires up to 3” wide. - QR fork attachment fits 19.6mm/26mm/27.7mm/35mm steerer tube (FX); QR seatpost attachment (RX) - Two tone injected high impact resistant plastic - Weight: 233 grams (FX); 226 grams (RX) - Rear angle adjustable - Size: 73 x 21 x 11 / 28.7” x 8.3” 4.3” (Front); 61 x 18 x 10 / 24” x 7.1” x 3.9” (Rear)
$39.99
DeFender TX is a compact trekking bike fender. Adjustable aluminum struts with QR levers for quick, perfect alignment and good tire coverage. The DeFender TX is made of high impact plastic and the highly polished underside prevents dirt buildup. Fits tires up to 700 x 44c. - Seat tube and seatstay or chainstay eyelets attachment - Injected high impact resistant plastic with aluminum struts - Adjustable angle and position for perfect tire coverage - 77. 8 x 26. 5 x 8.6 cm /30.6” x 10.4” x 3.4” (Rear) - Weight: 245 grams
$57.95
Topeak's DeFender XC1 front fender offers durable rain and mud protection for your 26-inch wheeled bike. It's incredibly light and easy-to-use, too. Extra clearance makes it perfect for long-travel forks, and a unique design allow it to disengage if an obstruction enters the wheel. The quick-release fork attachment allows the DeFender to be installed and removed in seconds and the angle is adjustable for the perfect fit.
$59.95
Topeak's DeFender M1/XC11 fender set offers durable rain and mud protection on wet and sloppy rides. They're incredibly light and easy-to-use, too. The front installs easily to any standard fork and the rear connects to most seat posts. Their quick-release attachments allow the DeFenders to be installed and removed in seconds.
$59.95
Topeak's RX TrunkBag EX is the ideal add-on for carrying your gear. It's built to last with rigid molded panels mated to 600-denier polyester. And, it's packed with handy features, such as a shoulder strap, carrying handle, taillight clip and top elastic straps. There are even reflective strips for safety. And, Topeak's ingenious RX System makes it a snap to attach it to your Topeak RX QuickTrack rack (sold separately).
$62.95
The Topeak DeFender TX is a compact trekking bike fender set. Adjustable aluminum struts with QR levers for quick, perfect alignment and good tire coverage. The DeFender TX set is made of high impact plastic and the highly polished underside prevents dirt buildup. Fits tires up to 700 x 44c. - Brake bolt and fork eyelets attachment (front) Seat tube and seatstay or chainstay eyelets attachment - Injected high impact resistant plastic with aluminum struts - Adjustable angle and position for perfect tire coverage - 56.8 x 13.7 x 8.4 cm /22.4” x 5.4” x 3.3” (Front); 77. 8 x 26. 5 x 8.6 cm /30.6” x 10.4” x 3.4” (Rear) - Weight: 192 grams (Front); 245 grams (Rear)
$64.95
Made from Toray Japan T700 and T300 carbon fiber using a unique carbon flat lay-up process, the Shuttle Cage XE is an incredibly strong, ultralight, and affordable 3K carbon fiber bottle cage. With two stainless steel bolts included, it's ready to mount and enjoy on your ride. - Fits standard water bottle - Two stainless steel bolts included - Material: Torayca Japan T700 and T300 advanced carbon fiber - Size: 14 x 8.6 x 7.4cm / 5.5" x 3.4" x 2.9" - Weight: 22g / 0.78oz
$69.95
A clever handlebar bag that converts to a waist pack. Great for cameras, cell phones and other essentials you want close at hand. Rain cover included. - Divided main compartment, Two side zip pockets - Material: 1800 denier nylon - Max Load: 5kg / 11lb - Fully padded - Waist Belt, Carry handle, Rain cover, Yellow lining - QuickClick Handlebar Mount (Fixer 8) - Fits 25.4, 28.6 & 31.8mm handlebars - Size: 22 x 18 x 13cm / 8.7" x 7.1" x 5.1" - Weight: 334g / 11.78oz
$89.95
A quick mount handlebar drybag that can be used alone or mounted as an accessory bag atop our FrontLoader bag system. Featuring sonically welded seams, a roll top closure and weathertight zippers the BarLoader protects your valuable gear from dry dusty trails or rain when riding in wet conditions. CAPACITY - 6.5 L / 395 ci MATERIAL - TPU BAG ATTACHMENT - Quick release buckles and hook and loop fastener MAX LOAD CAPACITY - 3 kg / 6.61 lb ADDED FEATURES - Inner bag, Reflective printing, Shoulder strap SIZE - 31 x 25.8 x 8.9 cm / 12.2" x 10.2" x 3.5" WEIGHT - 276 g / 9.73 oz
$89.95
A full featured medium capacity handlebar bag with a QuickClick mount and shoulder strap that makes it easy to take it with you. Fully padded, divided main compartment plus front zip and two side pockets keep gear organized. Perfect for extended touring, day trips and commuting. Rain cover included. - Clear map cover - Shoulder strap - Carry handle - Rain cover - 3M reflective strip, safety light clip (3M is a registered trademark of 3M Company) - Bag Attachment: QuickClick handlebar mount - Fits 25.4, 28.6 & 31.8mm handlebars - Compartments: Divided main compartment, front zip pocket, two side zip pockets, clear map pocket - Material: 1800 / 840 denier nylon - Max Load: 5kg / 11lb - Fully padded - Size: 25.5 x 23 x 18cm / 10" x 9.1" x 7.1" - Weight: 670g / 1.48lb
$89.99
MTX QuickTrack compatible TrunkBag featuring a divided main compartment constructed with Topeak's unique process of combining rigid panels and flexible fabric for structure and water repellency. Features two mesh side compartments for extra capacity and a rear water bottle holder that lets you carry more water on extended trips. - Attachments: 1 divided main compartment, two mesh side pockets - Capacity: 8L / 480 ci - Size (L x W x H): 35 x 21 x 19 cm / 14.2” x 8.3” x 7.5” - Weight: 870 g / 1.92 lb Added Features: - Water bottle holder Shoulder strap - Carrying handle - Elastic top bungees - 3M reflective strip - Safety light clip - Optional rain cover
$99.99
Pack freedom in your handlebar bag and let it guide your way. FrontLoader is ideal for light and bulky items like sleeping bags, camping gear and spare clothing. Constructed of lightweight, highly water resistant and durable materials, it’s easily installed and removed with its straps and quick release buckles while the supplied external strap holds additional gear for convenient access. An 8 liter waterproof bag is included to keep contents completely dry and the built-in air release button draws air out from the bag to keep it compact. - Capacity: 8L - Spacers and straps with quick release buckles - Max Load: 5 kg / 11 lb - Material: Polyethylene / nylon Lightweight, durable, water repellent and stain resistant - Waterproof rating: 10,000 mm (waterproof carry bag) - Added Feature: Waterproof carry bag, External straps, Air release button - Weight: 386 grams - Size: 22 x 15 x 15 cm / 8.7” x 5.9” x 5.9”; 50 x 15 x 15 cm /19.7” X 5.9” x 5.9” (Waterproof Carry Bag)
$26.99
Stainless steel bottle cage made with extra stiff 6mm OD tubing. - Three sets of holes for multi-position mounting - Weight: 83g - Semi-polish finish - Made in Japan
$27.90
- Copper finish matches premium leather saddles and MKS pedals - 4.5Mm aluminum rod with aluminum bolts - Made in japan
$58.00
The Sidekick Stem Pouch is a bicycle bag that fits a water bottle, snacks, and is an ideal bag for your cell phone and essentials. Featuring two mounting systems, the Sidekick attaches to the bicycle stem and handlebars with the three included velcro straps, or piggy-backs to our Kestrel Handlebar Bag, Ardea Pack, and Anchor Hip Pack with MOLLE snap straps. Instantly level up your Wald front basket set-up by hitching on a Sidekick or two. The Sidekick Stem Pouch is made out of Challenge ECOPAK 100% recycled polyester and contains roughly 2 plastic bottles rescued from ocean beaches. Every superhero needs a sidekick. The Sidekick Stem Pouch attaches securely into the nook between your bicycle stem and handlebars. Nobody puts Baby in a corner. The Sidekick Stem Pouch doesn’t only nail it as a bicycle handlebar bag–it’s a winner added to your bikepacking and day-ride bags–our Sidekick features two MOLLE snap straps to allow you to add this clever cylinder to our most popular bike-camping and urban bicycle bags. Attach the Sidekick Stem Pouch to the Kestrel Handlebar Bag, Ardea Pack, and Anchor Hip Pack. Also Features: - Challenge Sailcloth recycled polyester bag cloth ripstop (450D) - Comes with 3 Omni Wrap velcro attachment straps vertical and horizontal daisy chains allow - Flexible attachment to handlebars and stem - Bottom drain hole MOLLE compatible nylon webbing snap straps - Attaches to the following bicycle bags: Kestrel Handlebar Bag, Ardea Pack, Merlin Randonneur Bag, Anchor Hip Pack Attaches and onto a Wald 137 Basket with the snap straps - Features Cyberian Cordlock one-handed open & close drawstring closure
$63.00
The super-sized Gibby Stem Bag is designed around a 32oz Nalgene bottle, giving it enough capacity to keep your snacks, hydration, and/or other essentials safe and sound, even on your longest, roughest bicycle adventures. The Gibby Stem Bag is made out of Challenge ECOPAK 100% recycled polyester and contains roughly 3 plastic bottles rescued from ocean beaches. The Gibby Stem Bag provides convenient storage on the stem and handlebars without compromising precious real estate for your hands. The Gibby Stem Bag has a liter more capacity than our Sidekick Stem Pouch and offers super-functional, one-handed entry and closure. Carry your valuables confidently knowing that the Gibby Stem Bag features added padding. The daisy-chain mounting system provides stable attachment on a variety of handlebars and stems making this bag a worthy companion for bicycle commuting, touring, gravel riding, and mountain biking. Features: - Challenge Sailcloth recycled polyester bag cloth rip stop (450D) - One-handed open and close cinch - Comes with 3 Omni Wrap velcro attachment straps - Vertical and horizontal daisy chains allow - Flexible attachment to handlebars and stem - Unique crescent shape to minimize knee-strike - Bottom drain hole Dimensions: - Measurements: 5" w x 9.5" h x 3" d - Capacity: 2.25 Liters - Weight: 3.5 oz
$25.00
An absolute masterpiece, this cage screams style. The Fly Cage’s clean lines and clean laser logo really stand out. No cage outperforms the Fly Cage Poly—its LockTight Wings design grip your bottle securely while still keeping it easily accessible. - 100% Polycarbonate - LockTight Wings design - Laser-etched logo - Road and MTB approved - High-end and durable