Write us a Review
Skip to main content
Zippy's Bike ShopZippy's is family owned and operated!Free lifetime tuneups with bikes from Zippy's!Zippy's AddressZippy's bikes phone numberOnly 3.5% tax at Zippy's Bike Shop!

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Parts & Accessories

Lazer Sport Impala Visor Screws
$6.99
Screws for Impala visor. - COMPATIBILITY: Impala MIPS, Impala - WEIGHT: 1g - MATERIAL: Aluminum
Bontrager Ballista MIPS Fit Pads
$10.99
Let's face it - we all sweat. Sweat stinks. Fresh pads will make your helmet smell and fit just like it did when it was new. Key features - Original equipment replacement fit pads for your Bontrager Ballista MIPS helmet - Also compatible with non-MIPS Bontrager Ballista helmet - Helmet fit pads should be replaced once per year to maintain fit and hygiene
Bontrager Blendr Blaze WaveCel Bike Helmet Mount
$19.99
Where your gaze goes, your light follows Add the safety of visibility to your helmet and light up the trail with help from the Bontrager Blaze helmet mount. Compatible with all Ion headlights. - Quickly mount front light and camera accessories on the front of your Bontrager Blaze WaveCel helmet - Tested with an accelerometer for intended breakaway point if involved in a crash
ABUS Quin Sensor for AirDrop/Moventor 2.0 MIPS/MoDrop/MoDrop MIPS
$69.99
Quin Sensor for AirDrop/Moventor 2.0 MIPS/MoDrop/MoDrop MIPS
Lazer Sport Bullet Pad Set
$9.99
Freshen up the interior of your helmet with a new pad set! Padset details listed below. Replacement padset for Lazer Bullet and Bullet MIPS helmets. Set includes six pads - Two front pads, two top center pads, two top side pads. - COMPATIBILITY: Bullet, Bullet 2.0 - ATTACHMENT: velcro - WEIGHT: 12g - MATERIAL: Foam
Lazer Sport Visor - Coyote
$14.99
Visor for Coyote helmet COMPATIBILITY - Coyote MIPS - Coyote - ATTACHMENT: Direct Mount - WEIGHT: 45g - MATERIAL: Nylon
Lazer Sport Strap Divider For Thick Straps
$3.99
Strap divider for thick Lazer helmet straps COMPATIBILITY - Blade+ MIPS - Blade+ - Tonic MIPS - Tonic - Coyote MIPS - Coyote - Chiru - Next+ - Cameleon MIPS - Compact DLX MIPS - Compact DLX - Compact - J1 - Gekko MIPS - Gekko - Lil'Gekko MIPS - Lil'Gekko - ATTACHMENT: strap - WEIGHT: 3g - MATERIAL: Nylon
Bontrager Specter WaveCel Bike Helmet Fit Pad
$18.99
New pads help your helmet fit best and smell fresh Let's face it - we all sweat. Sweat stinks. Fresh pads will make your helmet smell, and fit, just like it did when it was new. - Original equipment replacement fit pads for your Bontrager Specter WaveCel helmet - Helmet fit pads should be replaced once a year to maintain fit and hygiene
Bontrager NeoVisor Bike Helmet Visor
$12.99
The NeoVisor keeps the sun and rain out of your eyes with a minimal design profile. We made it easily removable for those last-minute decisions before a race or in the midst of a ride. - Removable visor fits Bontrager helmets with FormFit brow bands - Hook and loop mounts make for easy mounting and removal while riding
Bontrager Rally MIPS Bike Helmet Fit Pad
$10.99
Let's face it - we all sweat. Sweat stinks. Fresh pads will make your helmet smell and fit just like it did when it was new. New pads can also help you dial in the perfect fit - keeping you comfortable and looking forward to the next ride. Key features - Original equipment replacement fit pads for your Bontrager Rally MIPS helmet - Helmet fit pads should be replaced once per year to maintain fit and hygiene
Bontrager WaveCel Boa Bike Helmet Fit System
$29.99
Replacement fit systems keep you comfy and secure Fit systems work hard to keep your helmets secure and to maximize safety. No matter what happens, these original replacements will get them working like new - Original equipment replacement Boa System for your Bontrager WaveCel helmet - Not compatible with non-WaveCel helmets - Full-length fit system designed for use with Medium and Large sized helmets - Short length fit system designed to optimize the fit of Small sized helmets
Bontrager Helmet Buckles 
$4.99
Helmet buckles work hard to keep your helmets secure and to maximize safety. No matter what happens, these original replacements will get them working like new. Key features - Original replacement buckles for your Bontrager helmet - Compatible with all Bontrager helmets
Bontrager Lithos Helmet Pad Kit
$10.99
Product Details - Original equipment replacement fit pads for Bontrager Lithos helmet - Helmet fit pads should be replaced once per year to maintain fit and hygiene
Lazer Sport ATS LED Taillight
$11.99
A helmet-mounted taillight is an ideal way to help make sure you are seen in low light conditions. The ATS LED Taillight only fits Lazer helmets equipped with the Advanced Turnfit System. - COMPATIBILITY: Bullet 2.0, Century MIPS, Century, Wasp Air Tri, Victor, Impala MIPS, Impala, Urbanize MIPS - BATTERY TYPE: LR41 button battery - RUN TIME: 37 hours - LUMENS: 4 lumens - ATTACHMENT: ATS dial - WEIGHT: 15g - MATERIAL: Nylon
Lazer Sport Padding—Urbanize
$9.99
Freshen up the interior of your helmet with a new pad set! Replacement padset for Lazer Urbanize MIPS helmets. Set includes two pads - one front pad and one top center pad COMPATIBILITY - Urbanize MIPS - ATTACHMENT: velcro - WEIGHT: 12g - MATERIAL: Foam
Lazer Sport Padding—Jackal
$6.99
Freshen up the interior of your helmet with a new pad set! - Replacement pads for Jackal helmets
Lazer Sport Aeroshell—Blade
$19.99
Keep the rain, snow and mud from getting inside your helmet, or use as a quick aerodynamic solution to close off the front and side vents. Aeroshell is a great accessory for compatible Lazer helmets! The Aeroshell is a plastic cover, designed to fit perfectly over specific models of Lazer helmets. The Aeroshell snaps into place and protects the riders head from wind and rain while still allowing for some air movement under the front of the helmet and out the rear vents. The Aeroshell is unique in that it is easily removed from the helmet when riding conditions are such that additional ventilation is desired. Snap it on when the rain is pouring down and pull it off when the sun starts to shine, the Aeroshell is the perfect tool for every possible condition. Additionally, the Aeroshell provides a significant increase in Aerodynamic performance once it is installed on the helmet. By closing off the ventilation holes, the amount of aerodynamic drag the helmet creates is strongly reduced, making your road helmet into an aero helmet and resulting in a faster ride. - COMPATIBILITY: Blade+ MIPS, Blade+, Blade, Blade MIPS - ATTACHMENT: Blade or Blade+ helmet - WEIGHT: 45g - MATERIAL: Polycarbonate
Lazer Sport Jackal & Impala Camera Mount
$9.99
Camera mount for Jackal and Impala helmets. - COMPATIBILITY: Jackal MIPS, Jackal, Impala MIPS, Impala - ATTACHMENT: Velcro - WEIGHT: 13g - MATERIAL: Nylon
Lazer Sport Strap Dividers for Thick Straps
$35.00
Strap dividers for thick Lazer helmet straps COMPATIBILITY - Blade+ MIPS - Blade+ - Tonic MIPS - Tonic - Coyote MIPS - Coyote - Chiru - Next+ - Cameleon MIPS - Compact DLX MIPS - Compact DLX - Compact - J1 - Gekko MIPS - Gekko - Lil'Gekko MIPS - Lil'Gekko - ATTACHMENT: strap - MATERIAL: Nylon
Lazer Sport Aeroshell—G1
$24.99
Keep the rain, snow and mud from getting inside your helmet, or use as a quick aerodynamic solution to close off the front and side vents. Aeroshell is a great accessory for compatible Lazer helmets! The Aeroshell is a plastic cover, designed to fit perfectly over specific models of Lazer helmets. The Aeroshell snaps into place and protects the riders head from wind and rain while still allowing for some air movement under the front of the helmet and out the rear vents. The Aeroshell is unique in that it is easily removed from the helmet when riding conditions are such that additional ventilation is desired. Snap it on when the rain is pouring down and pull it off when the sun starts to shine, the Aeroshell is the perfect tool for every possible condition. Additionally, the Aeroshell provides a significant increase in Aerodynamic performance once it is installed on the helmet. By closing off the ventilation holes, the amount of aerodynamic drag the helmet creates is strongly reduced, making your road helmet into an aero helmet and resulting in a faster ride. - COMPATIBILITY: G1 MIPS, G1 - ATTACHMENT: G1 helmet - WEIGHT: 45g - MATERIAL: Polycarbonate
Bontrager Ballista Vent Covers
$5.99
These covers are key to keeping your Ballista helmet aero and cool. No matter what happens, these original replacements will get them working and looking like new. - Works perfectly with your Bontrager Ballista helmet - Original equipment replacement vent covers
Bontrager Helmet Fit Pad Velcro Kit
$4.99
The key to getting your helmet fit pads stay put Bontrager helmet fit pads are affixed to the inside of the helmet via this Velcro kit. No matter what happens, these original replacements will get them sticking like new. Product details - Replacement adhesive Velcro kit - Compatible with all Bontrager helmets
Bontrager Quantum MIPS Helmet Fit Pads
$9.99
New pads help your helmet fit best and smell fresh Let's face it—we all sweat. Sweat stinks. Fresh pads will make your helmet smell, and fit, just like it did when it was new. - Original equipment replacement fit pads for your Bontrager Quantum MIPS helmet - Also compatible with non-MIPS Bontrager Quantum helmet - Helmet fit pads should be replaced once a year to maintain fit and hygiene
Lazer Sport Padding—Cameleon
$9.99
Freshen up the interior of your helmet with a new pad set! Padset details listed below. Replacement padset for Lazer Cameleon MIPS helmet. Set includes four pads - front pad, two top side pads and top center pad. - COMPATIBILITY: Cameleon MIPS - ATTACHMENT: velcro - WEIGHT: 12g - MATERIAL: Foam
Lazer Sport Strap Divider For Thin Straps
$3.99
Strap divider for thin Lazer helmet straps COMPATIBILITY - Bullet 2.0 - G1 MIPS - G1 - Z1 MIPS - Z1 - Century MIPS - Century - Victor - Wasp Air Tri - Impala - ATTACHMENT: strap - WEIGHT: 3g - MATERIAL: Nylon
Previous page Page 2 of 2