Other

A well-exercised dog is a happy dog, so give Fido a good workout while you ride! Sunlite's Dog Leash consists of a metal bar that mounts under the rear axle bolt or quick-release and straps to your chainstay. This keeps the center of gravity low so you stay stable if your dog pulls to one side. The bar is long enough to keep your pup away from the bike, too.

When you need to move your handlebars up, install Sunlite's Chromoly Quill Stem Extender. One end goes inside the steerer tube and your quill stem inserts into the top. It provides 8 1/4 inches of rise and is compatible only with quill stems and steerer tubes.

- Cartridge Bearing - 1-3/8-inch Outer Diameter

A proper riding position makes all the difference when you're racing or pursuing your personal best, so Sunlite offers the Alloy Tri-Bar to get you in an aerodynamic tuck. It clips to your handlebars easily and fits most road and mountain bars. The aluminum construction is light and tough for years of use, while the forearm pads keep you comfy no matter how far you push. Enter your first time trial or just shave off some precious seconds on the lunch loop!

- Size: 1/2x1/8 & 3/32 (set) - Links: 1 each per bag

• Forged aluminum seat clamp • Chromoly integrated QR seat binder bolt • Increased durability and clamping force

- DT Swiss cartridge bearings - Sold in pairs

- 6061 Forged Alloy - Made to O.E.M. specifications - Correct hardness to reduce damage to frame upon impact

• Aluminum clamp • Built-in rear rack mount

• Shim available in various sizes • For use with 25.4mm or 27.2mm seatposts

- Alloy construction - Great for Cruiser or BMX bar conversions

- Universal design double rail saddle clamp

- Sunlite replacement cartridge bearings - Sold in pairs

• Quick-release seatpost clamp • Aluminum lever and cap with a 6mm chromoly bolt

• With bolt & nut • 1 1/8-inch = 28.6mm • 1-inch = 25.4mm

- Aluminum w/lock nut - 18mm long/6mm O.D.

• Quick-release seatpost clamp • Chrome-plated chromoly • Rubber-covered handle for a great grip

Sunlite braze-on front derailleur adapter

- Includes everything needed to mount hex nut style (non-recessed) caliper brakes - Model: Front

- Routes cables underneath the bottom bracket - Will not rust or corrode

- Replacement front cable hanger - Aluminum construction

- Aluminum w/lock nut and mount - Slotted mount design

- Chrome allen seat binder bolt

- Replacement padded arm rests for clip-On Tri-Bar II - Easy clip on installation fits most road bars - Clamp Size: 22.2mm

- Crown Race MX - Size: MX TH 26.4mm

- Use: Brake - Length: 30mm - Diameter: 5mm

- Rust resistant coating - M5x.80mm Thread pitch - Bag of 10 - Size: M5 x 16 Thread Pitch: Braze-on bolt

- Binder bolt - M6 x 45mm chromoly bolt - 13mm CNC alloy nut - Length: 45mm

• Aluminum • CNC-finished

- Variable widths - Left: 35mm - Center: 52mm - Right: 37.5mm - Length: 124.5mm - Overall: 145.5mm

- For MTB levers - 7mm x 1mm - Aluminum construction

- w/Nut - 1-3/4-inch

- Steel construction - Adapts BMX chainrings with 22mm hole to 19mm spindles - Bag of 10

- Stainless steel button head bolts - Sold in bags of 10

Sunlite's Lowrider Sissy Bar adds that level of style and classic looks that only a nice, long sissy bar can. Keep that banana seat comfortably slung and looking tight.

Replacement bearing for the lower half of YST8003 #7 headset.

- Fits Shimano and ISIS BBs - Single key release - Shell: 15mm SHI/ISIS axle bolt one-key release - Sold in pairs

• Aluminum clamp with a chromoly bolt

- Large Flange-Fits Splined MX Cranks - Sold in pairs

• Forged 6061 T6 alloy clamp • Safety lever clamping position follows clamp • Stops the QR lever from catching on things • Black anodized finish

- Hub sealed bearing - Fit: ID 15mm - I.D.: 15mm - O.D. 28mm - Width: 7mm

- Use: S.I.S. - Length: 30mm

- Oversize 10mm - Fits new style MTB & BMX levers - Aluminum construction

- Standard steel replacement

- Standard replacement cantilever/v-brake bosses

- Tubular alloy construction - Padded hand grip section - Integrated, replaceable and adjustable padded arm rests - Easy clip on installation fits most road bars - Clamp Size: 22.2–25.4mm

- Rust-resistant coating - M8x16mm - Shell: 8mm flanged axle bolt - Includes 2 bolts

- Includes everything needed to mount non-threaded brake pads to cantilever brake arms

- Model: Derailleur Bolt & Nut - Compatibility: Mounts rear bracket to frame

- 8x1mm Allen head

- Model: Replacement bolt - Compatibility: Allen, M5x16

Replace the top bearing in your YST8300 headset with these caged ball bearings.

- Rubber - Color: Black

46 x 55 x 51 x 152mm

- Replacement cable anchor bolt for brakes - Includes nut and washer

- Fits Shimano and ISIS BBs - 16mm ID x 20mm OD x 1.5mm Thick - Bag of 10

- Alloy spacer converts an 8-speed rear hub to use a 7 speed cassette - Range: 4mm - Color: Silver

- Type: Lock washer - Size: 1" Keyed

- Crown Race - Size: 27.0mm

- Crown Race #8 - Size: 26.4mm - Color: Silver - Material: Alloy