All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - For carbon frames, use (2) M3x8 Flat head screws - For all non-carbon frames, use (2) M3x10 Flat head screws
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt
This Wheels Manufacturing Shimano/SRAM Single Speed Conversion Kit includes chain guides for carefree single speeding. Large chain guides sandwich the cog with diameters slightly larger than the cog to keep the chain from hopping off the rear cog. Includes: - (2) - 9mm chain guides - (6) - 3mm spacers - (2) - 1mm shims - (4) - 0.3mm shims - (1) - lockring - (1) - 16t cog Compatible with: - Any ½ x 1/8 pitch chain, this includes BMX and Track chains - Any 8 or 9-speed chain Note: Does not work acceptably with any 10 or 11-speed chain
$5.99 - $14.99
• Aluminum clamp with a chromoly bolt
• Forged aluminum seat clamp • Chromoly integrated QR seat binder bolt • Increased durability and clamping force
$7.99 - $9.99
• Shim available in various sizes • For use with 25.4mm or 27.2mm seatposts
A proper riding position makes all the difference when you're racing or pursuing your personal best, so Sunlite offers the Alloy Tri-Bar to get you in an aerodynamic tuck. It clips to your handlebars easily and fits most road and mountain bars. The aluminum construction is light and tough for years of use, while the forearm pads keep you comfy no matter how far you push. Enter your first time trial or just shave off some precious seconds on the lunch loop!
- DT Swiss cartridge bearings - Sold in pairs
$15.99 - $19.99
When you need to move your handlebars up, install Sunlite's Chromoly Quill Stem Extender. One end goes inside the steerer tube and your quill stem inserts into the top. It provides 8 1/4 inches of rise and is compatible only with quill stems and steerer tubes.
$9.99 - $19.99
- 6061 Forged Alloy - Made to O.E.M. specifications - Correct hardness to reduce damage to frame upon impact
- Universal design double rail saddle clamp
- Alloy construction - Great for Cruiser or BMX bar conversions
• Aluminum • CNC-finished
$15.99 - $16.99
• Aluminum clamp • Built-in rear rack mount
• Forged 6061 T6 alloy clamp • Safety lever clamping position follows clamp • Stops the QR lever from catching on things • Black anodized finish
Three-Speed Sturmey Archer Coaster Brake Trike Conversion Kit - 21T Front Drive Cog - 22T Rear Transfer Cog - 24T Axle Drive Cog - Cable stop required when installing on Sun Atlas Industrial Cargo Trike
Your Sun Traditional Trike can be made even more useful with the addition of twist-shift 7-speed gearing and a powerful rear disc brake! This complete kit includes all necessary components for converting your 2016 or later Sun Traditional Trike to a 7-speed derailleur system with a mechanical disc brake, giving you an easy and efficient ride up and over any type of hill and smooth, safe stopping on the other side. The parking brake feature on both front and rear brake levers allows you to lock either or both brakes simultaneously to load or unload with ease. Simple and common parts mean easy maintenance for years of use. Kit includes all components including items such as cable ties and other small parts for an original-equipment look. - Sun Race M30 7-speed twist shifter - Sun Race M40 7-speed direct-mount derailleur - Sun Race M3 7-speed freewheel (13-15-17-19-21-24-28T) with 15mm trike axle adapter - 36T x 1/2" x 3/32" chainring - K.M.C. Z51 1/2" x 3/32" chain - Promax DSK-300 mechanical disc brake and mounting hardware - Promax 160mm stainless steel rotor with 15mm trike axle adapter - Promax BL-46K 4-finger brake lever with parking lock - High-density black foam grips, 92mm left side / 130mm right side - Kit includes all parts needed for complete installation - Kit only compatible with 2016 or newer Sun trikes with rear derailleur and disc brake mount on rear unit
Disc Brake Adaptors - Includes Stainless Bolts
SE Racing 1 piece single speed steel chainrings Accepts 1/2" x 1/8" chains
- Anti chain-suck device - Allows the front derailleur to be adjusted for strong downshifts - If not using front derailleur the device can act as a chain guide
Ditch the zip ties and clean up the look of your cables with Origin-8's Clamp-on Cable Stop. Available in a variety of diameters for different sized round frame tubes, the cable stop bolts on and provides a channel to run rear brake or derailleur housing to hold it securely in place. It's made of lightweight CNC'd aluminum.
Is your seat post just a hair too small for your frame? Origin-8's Multi-Fit Seat Post Shim is a great solution. • Multi-Fit • Aluminum • 25.4mm internal diameter • 28.0mm outer diameter
Origin-8's Pro Cable Guide Pulley fulfills all your special cable routing needs. Designed to clamp onto seat tube, it allows you to route your cable for bottom pull front derailleurs. Uses a sealed bearing pulley.
$15.99 - $24.99
Origin-8's Quill Adapter allows you to use modern threadless stems on bicycles with threaded forks that take quill stems (stems with bolts in the center). The Quill Adapter is made of light and durable 7075 aluminum and features a chromoly bolt.
Forged AL6061-T6 alloy construction with CNC groove design - Machined insert for even clamping force - For use with carbon seat posts - Ultra-lightweight
- Converts a cassette hub to a single speed - 8 spacers included in various sizes to adjust chain line - Available in black or red anodized 6061 aluminum - Fits Shimano style cassette bodies - Conical spacers for increased cog stiffness
Integrated spacer and top cap for use with star nuts and standard alloy steerer tubes - Provides a clean and lightweight stem cap solution - 6061-T6 alloy cap with 7075 alloy bolt
Standard replacement star nuts for threadless steerers.
$2.00 - $8.99
- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool
$10.49 - $12.99
Greenfield's Kickstand attaches quickly and easily to most bicycles and provides a safe and convenient way to park your bikes at home and on the road and trail. It's also durable, lightweight, and looks great on any bike. Plus, it's made of a special non-corrosive aluminum and is built to last. You'll want one on all your bikes! - 285mm (for bikes 22" and under), 305mm (for bikes 22" and over) - For bikes without factory mounting plate (includes top plate and bolt) - Certified Non-Corrosive Casting - Snap Action Mechanism - Non-Slip Clamping Surface
Page 1 of 35 Next page