Write Us a Review
Skip to main content
Zippy's Bike ShopZippy's is family owned and operated!Free lifetime tuneups with bikes from Zippy's!Zippy's AddressZippy's bikes phone numberOnly 3.5% tax at Zippy's Bike Shop!

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Model Years
  • Show Fewer Model Years

Seatposts

$73.95
Ritchey's WCS 1-Bolt Seatmast Topper makes saddle installation and adjustment super easy. It's constructed of forged aluminum for strength and the single bolt clamp makes it very simple to find your perfect saddle position. Furthering the ideal fit, the WCS Seatmast Topper comes in 50mm and 70mm lengths and different offsets.
$633.00
The new Reverb AXS XPLR dropper post delivers more control, confidence, and fun on gravel roads everywhere. Getting the saddle out of the way means more room to move, saving you from awkward maneuvering and sketchy descents. We created an all-new design complete with lightweight air-only internals featuring built-in compliance we call ActiveRide. It's like travel for your saddle. Enabled by SRAM AXS technology, Reverb AXS XPLR is part of the ultimate personalized cockpit. - New 27.2mm Reverb AXS XPLR delivers more control, confidence, and fun for gravel - ActiveRide—Air only internals provide a fully rigid top-out position. With the touch of your AXS controller, you've got built-in compliance to ensure comfort and control over the roughest sections of gravel - Two travel options to choose—50mm or 75mm - Saddle clamp options compatible with 7x10 oval carbon rails. - Seat post length includes 400mm and 350mm (50mm drop only) - AXS Technology allows rider customization via the AXS Mobile App - AXS handlebar controls (drop or flat bar) - Shared battery with all other SRAM AXS enabled components - System is completely waterproof and dustproof to IP69K—take it anywhere - SRAM AXS battery and charger included SPECIFICATIONS: - TRAVEL: 50mm, 75mm - POST DIAMETER: 27.2mm - POST LENGTH: 350mm, 400mm - REMOTE: AXS Controller Sold Separately - SADDLE RAIL COMPATIBILITY: Round/Oval (7x9 & 7x10), Round/Oval (7x9) - WEIGHT (G): 562 - WEIGHT BASED ON: 75mm Travel 400mm Length W/O battery - Battery 25g
$359.00
The proven Transfer seatpost gets lighter and tighter. Completely redesigned from the ground up, with improved serviceability, decreased weight, reduced length, and decreased insertion depth. "Factory" says it all. The best-of-the-best technology we have to offer is available in our Factory Series models with our buttery smooth, ultra-durable Genuine Kashima Coat. These products are World Cup proven. The Transfer continues the excellent reputation of smooth function and great reliability with an infinitely adjustable height design, and internal or external cable routing options. Low lever force and great modulation make it easy to regulate return speed and small height adjustments. The Factory Series Transfer features Genuine Kashima Coating for maximum performance. - Cable actuated with tool-free quick disconnect for easier installation and removal - Low lever force provides consistent actuation pressure even with saddle weighted or unweighted - Easy to modulate return speed with lever - Factory Series models feature Genuine Kashima Coat - Remote lever sold separately
$350.00 - $410.00
3 years of REVIVE out in the market resulted in another benchmark product for BikeYoke: REVIVE 2.0. The new extralong 213mm REVIVE required a lot of re-thinking and re-engineering the whole chassis structure and since we think they deserve it, the shorter REVIVES will also get all the nice updates, and benefit from what was originally implemented only for the longest sibling of the REVIVE family. Noteworthy updates of the REVIVE 2.0 include: - One piece 3D-forged upper tube unit for improved stiffness and strength - Fully hard-anodized pin seats in the upper tube for improved corrosion-resistance - CNC-finished actuation lever for even smoother engagement - New upper saddle clamp and saddle bolts with integrated conical washers for even simpler saddle installation Wanna know more about the REVIVE? What if there was a dropper post, that actually solves and not just improves reliability issues, saves cost and time on the long run, and does not let you worry about too much time spent at service-centers? Or how about “bleeding” your seat post within a few seconds, while it is still installed in your bike? BikeYoke presents the REVIVE dropper post, featuring one of the most brilliant design features in dropper post design in many years. More than 10 years of experience in drop-post design went into the “REVIVE” and the development has finally paid off. Of, course, just as many other companies, BikeYoke would say, that REVIVE is reliable and strong and smooth. And yes, REVIVE is all of that, but not because we tried to improve current designs, but because we were thinking outside of the box and created a new concept, that is completely different from everything before. To understand the benefits over other posts you have to know about the problems of many current designs first. Many of the popular current seatpost designs are based on a hydraulic lockout-system that relies on a perfectly sealing IFP (Internal Floating Piston), separating oil from air to prevent the seatpost from getting sagging or bouncing. There are a lot of difficulties to overcome when using an IFP because an IFP has to maintain 100% sealing function. If air could go to the oil side, your post will start becoming springy. This happens to a lot of posts in the market already and is the main issue why posts need to be serviced. That´s why BikeYoke´s “REVIVE” features a NON-IFP design, because we think it is too difficult - if not impossible - to make a really reliable design using an IFP. REVIVE only requires 2 dynamic seals in the hydraulic circuit: The shaft sealing and the main piston sealing for the lockout mechanism. The highly critical IFP has been removed, and with it the need of perfect concentricity and finish of the sealing surfaces of the tubes. The lack of an IFP also results in the smoothest action you can think of. The most important and ground-breaking feature of Revive is its “REVIVE-VALVE”. Even REVIVE can get air somewhere where it does not belong. This can happen for example when you actuate your seatpost while its upside down. And here is where the patented RESET VALVE comes into play: - Insert a 4mm Hex Key into the REVIVE hex port, turn it and push down the post by hand. - This will reset your hydraulic circuit on the fly - whenever. wherever. This is done just within a few seconds and only by the turn of a 4mm Allen key or the integreated mini reset lever, that comes with the post - of course without even having to remove your drop post from your bike. So, now one might already understand that: - No external air will want go inside the post´s hydraulic circuit, since it is charged with higher pressure, than its surroundings. - No oil will go out (or at least very very little oil over the curse of a long time), because of very stable sealing - external sealing has never been a real problem of current post design - The hydraulic system can be reset to “new” via the unique “REVIVE-valving” - This means the hydraulic circuit is a very stable closed system and basically maintenance free. Still there are parts that will need to be serviced sooner or later and when designing REVIVE it was put a lot of attention to maximum user-friendly serviceability: - Bushings and keyway pins will wear over time. Usually, the pins wear first and you would want to replace them to reset your rotational play. - Exchanging the pins and the lower bushing is simple and does not require any opening of the hydraulic system and can be done within less than 5 minutes. 1 set REVIVE dropper post includes: - 1x REVIVE Seatpost - 1x cable housing 1500mm - 1x inner wire 1700mm - 2x housing endcap - 1x barrel cable clamp - 1x air valve adapter - 1x Quick-Reset-Lever - 1x remote (optional) - 1x BikeYoke I-spec adapter or Splits Clamp (optional) - 1 set titanium saddle bolts and nuts (optional)
$39.95
- Extra long forged 6061 aluminum post allowing maximum height adjustment - 2-bolt micro-adjust clamp - 450mm long - 345g @ 27.2mm
$249.99
- Internal Routed, Infinitely Adjustable Design - Simplistic - Fully Sealed Alloy Cage / Stainless Tip Cartridge System - Durable 3D Forged Head - With 7075-T6 Forged Clamp - Featherlight Thumb Actuation - Industry Leading - Intelligent Keyway System - Ensures Minimal Play - Easiest Installation - Cable Head Attaches At Base - Cold Weather Approved - Tested Down To -20C. - 1x Lever included - With Premium Jagwire Lex Slick Housing, Stainless Cable and Hardware - Remote Position: On handlebar - Cable Routing: Internal - Offset: 0mm - Clamp Type: Standard, double bolt - Seat Post Material: Aluminum - Seat Post Weight: 510g
$14.99 - $29.99
- Forged aluminum - 7/8-inch seat-clamp diameter - 165 grams
$410.00 - $440.00
Our award-winning REVIVE is also available as an oversized version for 34.9mm seattubes. Not only the lower tube diameter increased to 34.9, but also the stanchion tube grew form 25mm to 28mm. Finally there is a dropper that gives a stunning look in beefy seattubes while gaining strenght and stiffness at the same time. This is unrivaled by the competition. Optimized wall thickness and materials keep the weight extremely low and so our REVIVE MAX weighs in lower than some "regular" sized posts of the competition. Let´s see, what´s special about our REVIVE posts: What if there was a dropper post, that actually solves and not just improves reliability issues, saves cost and time on the long run, and does not let you worry about too much time spent at service-centers? Or how about “bleeding” your seat post within a few seconds, while it is still installed in your bike? BikeYoke presents the REVIVE dropper post, featuring one of the most brilliant design features in dropper post design in many years. More than 10 years of experience in drop-post design went into the “REVIVE” and the development has finally paid off. Of, course, just as many other companies, BikeYoke would say, that REVIVE is reliable and strong and smooth, … And yes, REVIVE is all of that, but not because we tried to improve current designs, but because we were thinking outside of the box and created a new concept, that is completely different from everything before. To understand the benefits over other posts you have to know about the problems of many current designs first: Many of the popular current seatpost designs are based on a hydraulic lockout-system that relies on a perfectly sealing IFP (Internal Floating Piston), separating oil from air to prevent the seatpost from getting sagging or bouncing. There are a lot of difficulties to overcome when using an IFP because an IFP has to maintain 100% sealing function. If air could go to the oil side, your post will start becoming springy. This happens to a lot of posts in the market already and is the main issue why posts need to be serviced. That´s why BikeYoke´s “REVIVE” features a NON-IFP design, because we think it is too difficult - if not impossible - to make a really reliable design using an IFP. REVIVE only requires 2 dynamic seals in the hydraulic circuit: The shaft sealing and the main piston sealing for the lockout mechanism. The highly critical IFP has been removed, and with it the need of perfect concentricity and finish of the sealing surfaces of the tubes. The lack of an IFP also results in the smoothest action you can think of. The most important and ground-breaking feature of Revive is its “REVIVE-VALVE”. Even REVIVE can get air somewhere where it does not belong. This can happen for example when you actuate your seatpost while its upside down. And here is where the patented RESET VALVE comes into play: - Insert a 4mm Hex Key into the REVIVE hex port, turn it and push down the post by hand. - This will reset your hydraulic circuit on the fly - whenever. wherever. This is done just within a few seconds and only by the turn of a 4mm Allen key or the integreated mini reset lever, that comes with the post - of course without even having to remove your drop post from your bike. So, now one might already understand that: - No external air will want go inside the post´s hydraulic circuit, since it is charged with higher pressure, than its surroundings. - No oil will go out (or at least very very little oil over the curse of a long time), because of very stable sealing - external sealing has never been a real problem of current post design - The hydraulic system can be reset to “new” via the unique “REVIVE-valving” - This means the hydraulic circuit is a very stable closed system and basically maintenance free. Still there are parts that will need to be serviced sooner or later and when designing REVIVE it was put a lot of attention to maximum user-friendly serviceability: - Bushings and keyway pins will wear over time. Usually, the pins wear first and you would want to replace them to reset your rotational play. - Exchanging the pins and the lower bushing is simple and does not require any opening of the hydraulic system and can be done within less than 5 minutes. 1 set REVIVE dropper post includes: - 1x REVIVE Seatpost - 1x cable housing 1500mm - 1x inner wire 1700mm - 2x housing endcap - 1x barrel cable clamp - 1x air valve adapter - 1x Quick-Reset-Lever - 1x remote (optional) - 1x BikeYoke I-spec adapter or Splits Clamp (optional) - 1 set titanium saddle bolts and nuts (optional)
$309.00
The proven Transfer seatpost gets lighter and tighter. Completely redesigned from the ground up, with improved serviceability, decreased weight, reduced length, and decreased insertion depth. Performance Elite Transfer Posts retain the same internals, diameter options, drop options, shortened stack heights, new patent-pending head design and proven internals as the Factory Series but have a black anodized upper. - Cable actuated with tool-free quick disconnect for easier installation and removal - Low lever force provides consistent actuation pressure even with saddle weighted or unweighted - Easy to modulate return speed with lever - Remote lever sold separately - 0mm offset
$199.99
The Highline 3 delivers infinite adjustment, smooth feel, and easy installation. Details - Premium Trelleborg sealing - Exclusive Igus LL-glide bearings and keys - Jagwire cable and housing - Self-contained hydraulic cartridge delivers industry-leading quality and reliability - Internal routing - Quick connect mechanism for ease of cable installation - Linear actuator for quick return speed - 2-bolt standard head - Remote sold separately
$299.99
The all-new Highline delivers infinite adjustment, smooth feel, and easy installation for any bike. Details - Shorter insertion length to fit more bikes - Premium Trelleborg sealing - Exclusive Igus LL-glide bearings and keys - Jagwire cable and housing - Self-contained IFP hydraulic cartridge - Internal routing - Quick connect mechanism for ease of cable installation - Linear actuator for quick return speed - 2-bolt quick-connect head - Remote sold separately
$70.00
The Whisky No.7 Seatposts are made from the highest quality materials to be durable, lightweight, and comfortable. Whether you’re remounting during the cross race, or abusing them on the trail, you can trust Whisky’s seatposts. Available in different diameters and offsets. - Convenient finger adjustment of saddle angle - Unidirectional carbon shaft, forged aluminum head - No rider weight limit - 5 year Whisky warranty - ASTM Condition 3 - For rough off-road riding and jumps less than 24"
$50.00
The Salsa Guide Seatpost is designed to blend into the background; just like a good seatpost should. Strong, reliable, and always just where you left it. - 6061 Aluminum shaft - Two-bolt head
$70.00
The Salsa Guide Deluxe Seatpost is premium aluminum: lightweight, strong, and drama-free. Count on it to be there when you need it. - 2014 Aluminum shaft - Two-bolt head
- LEV CI takes rhythm from the trail and injects it straight into your soul. - 65-175 millimeters of perfect drop are just enough to turn your ride up to eleven. - A full unidirectional carbon mast routes our Recourse II Ultralight Cable System directly through your frame to our KGSL lightweight remote – a combination saving over 50g compared to our KG ALLOY remote and standard shift cable. - The result is clean lines for you and your bike. LEV CI’s newly designed cable interface system is easier to setup and service while at the other end, a high compression-molded head connects LEV CI to your saddle. - Our patented one-way roller clutch bearing and highly evolved seal collar keep LEV CI running smooth and free of side-play for thousands of miles and vertical feet.
- LEV has always represented the latest technology but is already a classic among top contending dropper posts. - With myriad of firsts to its name; first hydraulic dropper to offer zero cable movement, first dropper to win a UCI World XC Eliminator event and first in countless enduros, magazine tests and customer satisfaction polls, LEV IS the first dropper seatpost to outperform itself.
$350.00 - $380.00
The Wolf Tooth Resolve Dropper Post is the first dropper post to use a self-bleeding cartridge. It has the shortest stack height of any dropper post on the market, has a short insertion depth, is one of the lightest dropper posts, and is completely serviceable at home. - Self-Bleeding Resolve Cartridge: At the heart of Resolve Dropper Post is a self-bleeding cartridge that removes air from the fluid chamber with every actuation. All dropper posts can get air in the chamber, which leads to sag and squish. Resolve Dropper Post is the only dropper post that purges air from the chamber, which means you'll never need to buy a new cartridge as you do with all other dropper posts. - Shortest Stack Height: The shortest stack height of any dropper post means that Resolve can get your saddle lower than any other dropper post. The lower your saddle, the more room you have to maneuver your bike on drops and techy descents. - Weight and weight per travel is equal to the best: Resolve Dropper Post is one of the most lightweight dropper posts on the market when it comes to grams per millimeter of travel. It's as much as 26% lighter than other dropper posts of the same travel size. - Short Insertion Length: When a dropper post has a short insertion length, longer travel options are unlocked for more bikes. A short insertion length is vital for smaller bikes, frames with curved seat tubes, and frames with seat tubes that have bottle bosses. - Travel Reduction with Spacers: The travel length of your Resolve dropper post can be customized in order to suit your bike and saddle height. Spacer kits are sold separately or those who would like to have the adjustment made later by their local shop mechanic. If you are comfortable with working on suspension components, you may be able to complete the installation yourself.
$53.99
3D forged one-piece AL6061-T6 construction - Wide saddle clamp design reduces rail stress and flex - Micro-adjust 2 bolt clamp design - 15mm setback - ISO-Mountain safety certified
$219.99
Full UD carbon shaft with alloy clamp - Wide saddle clamp design reduces rail stress and flex - Micro-adjust 2 bolt clamp design - Available in 0mm and 15mm setback options - ISO-Mountain safety certified
$309.00
Saddle Up Based on the latest FOX Transfer platform with its proven performance, the new Turbine R Dropper Post features a slick seat clamp design for reduced stack height and a 25g weight savings from the previous version. This post will treat you right. Less is More New, patent-pending FOX seat clamp design dramatically reduces stack height, allowing you to fit more travel into a shorter space. Full Coverage Proven FOX-designed internals provide infinite height adjustment, but perhaps more importantly—even easier serviceability. No-Sweat Installation Mounting a saddle and getting your saddle position dialed is easy thanks to the user-friendly seatpost clamp. Brilliantly Uncomplicated Uses standard shifter cable and housing. You know, just to keep things real. Oh yeah—it's also 25g lighter than the previous version. - Compatible with Matchmaker - Includes post only - Mechanical lever actuation - Head Type: Zero Offset—2 Bolt - Weight: 520g
$18.99 - $19.99
Kalloy's 602 seatpost comes in a wide variety of diameters to fit most frames. Simple, sturdy, and lightweight, the 602 makes a great replacement seatpost.
$33.99
• Aluminum • Coil spring suspension • Adjustable pre-load design • Collar adjustment for play removal • 7/8-inch seat-clamp diameter
$39.99
• Forged alloy construction • Single top bolt adjustment
$99.99
- UD carbon shaft bonded to an AL6061-T6 alloy top clamp - Wide saddle clamp design reduces rail stress and flex - Micro-adjust 2 bolt clamp design - ISO-Mountain safety certified
$89.99
- 3D forged from 2014 heat-treated aluminum for optimal strength to weight ratio - Race Face's triple butting design maintains strength in critical areas while reducing overall weight - The tube is anodized & shot peened for increased fatigue life - Updated Hunter head design for easy saddle installation and full adjustability - 3D forged from 2014 heat treated aluminum with triple butted mast - Thumbscrew tightening system allows quick dial-in of the saddle angle by hand - Angled clamp bolts allow easy tool access for hassle free adjustment - Rubber grommet seals the post to prevent water from entering seat tube - Accepts 7/8mm CrMo/alloy and 7/9mm carbon rails. 260g (30.9mm)
$129.99
- Carbon fiber mast with micro clamp aluminum head - One bolt adjusts tilt and fore-aft saddle position for micro tuning which allows for superior comfort and performance (no-offset clamp) - Unsurpassed strength to weight ratio - Specific to I-Beam saddle
$214.99
The EA70 AX dropper post joins our AX series of horizon-expanding drop bar gravel and adventure componentry. Features include a reliable cartridge design, internal routing and availability in two lengths - 350mm and 400mm. Our EA70 AX post brings 50mm of drop, allowing for fitment on everything from your wide-tired CX bike to modern gravel bikes. - Can be paired with drop bar optimized levers or drop bar compatible shifters - Cable attaches from either direction for compatibility with all dropper levers - Two lengths for better fitment on dropped top-tube gravel bike frame designs - Finish: Black Ano - Weight: 350mm - 400g - Head Offset:0mm - Drop: 50mm - Quill Sizes: 27.2mm Diameter - Material: EA70 Alloy
$299.95
- Defined suspension on rough surfaces - Lightweight and comfortable construction - Uncompromised road cycling performance Unique comfort, lightweight and aesthetically modern: The Ergon leaf spring seatpost revolutionizes comfort on the road bike, all-road and gravel bike. Rough roads and gravel are smoothed out by the two carbon fiber VCLS leaf springs, while the saddle angle remains unchanged by the parallel displacement of the two leaf springs and the floating flip head. The precise and highly sensitive tuned leaf springs work so well that they do not affect the performance of the bike or cyclist. The CF Allroad Pro Carbon Setback model offers a 25mm of setback
$31.99
Dimension Alloy seatpost. - 1-piece forged AL-2014 - Clamp Style: Standard Rails - Material: Aluminum - Max Height: 245mm - Min Height: 35mm - Weight: 250g
$214.99
Such Great Heights The budget-friendly Aeffect R Dropper Post is a rock-solid, shred-ready entry into the dropper post world. Designed right to keep you on the trails and out of the shop as much as possible, you'll wonder how you ever rode without one. It's What's Inside That Counts The brains of this dropper post are an extremely reliable cable-actuated hydraulic cartridge that delivers infinite adjustment within its travel. Simple Saddle Setup A user-friendly zero-offset seatpost clamp really cuts down on the time between setting up your saddle and ripping down the trail.