Lighting

The Zecto Drive 250+ Front is a low-profile, high-visibility light with six ultra-bright LEDs that offer up to 250 lumens of brightness. Its six combined solid and flash output modes offer versatile options for any situation. Its highly disruptive Daytime Flash mode ensures maximum visibility during daylight hours, and the intelligent Power Indicator displays battery runtime and increases side visibility. The light is fitted with a patented 2-in-1 clip and strap mounting system, allowing easy attachment to handlebars or loops. It is rigorously tested to IPX7 Waterproofing standards to withstand even the harshest weather conditions. With a 650 mAh battery capacity, the Zecto Drive 250+ Front offers a maximum runtime of up to 40 hours in Femto mode. It also boasts waterproof USB-C charging(cable not included), making it easy to keep it charged and ready to go. - Max 250 lumens / 40-hour runtime in Femto mode - Daytime Flash mode with Highly Disruptive Pattern - Waterproof USB-C charging port with charge indicator - 2-in-1 clip and strap mounting system (Patented) - Multiple mounting options like dog collars or strollers - Six combined solid and flash output modes - Rigorously tested to IPX7 Waterproofing standards - 650 mAh battery capacity

The E-Bike Orbis StVZO E600 is an advanced StVZO certified e-bike cycling front light delivering 600 lumens of output. This light is housed in a die-cast and CNC-Machined Aluminum body with extruded cooling fins ensuring durability, efficient heat dissipation, and an advanced computerized thermal management chip to maximize lumen output efficiency. The Orbis StVZO E600 offers Daytime Running Light mode as well as an intelligent 'Thermal Protection Safety Feature' which automatically reduces light output for safety and efficiency. Rigorously tested to IPX7 Waterproofing standards, it is built to withstand various weather conditions. It has an integrated 130 cm (51.2 inches) cable connecting to the e-bike's motor/battery system. The BES3 BOSCH connector and CNC Machined Aluminum E-bike Mega Mount are included. E-Bike compatibility: 10.5 – 13.5V input, 8.5W Low Beam / 13W Daytime Running Lights. Our e-bike lights are powered by the motor/battery of an e-bike and need to be manually installed. Proper installation may require some disassembly of the bike and motor (depending on make and model, battery type) and additional wiring to connect the light to the motor. Please contact the e-bike or motor manufacturer for installation instructions. It is highly recommended to have a trained e-bike professional install your lights for you. - 600 lumens - StVZO-Optimized lens - Daytime running lights (ECE R87) - Die cast and CNC-machined aluminum body with optimized heat-dissipating design - Includes CNC Machined Aluminum E-bike Mega Mount - Thermal Protection Safety Feature: Auto-reduces light output for safety and efficiency - Rigorously tested to IPX7 Waterproofing standards - E-bike compatible 10.5 – 13.5V input, 8.5W LB / 13W DRL - Versatile E-bike system compatibility - 130cm power cable with BES3 BOSCH connector included

The NiteRider Tail Light Strap Mount allows for quick installation and fitment on to standard seat posts. It features a quick release tab that allows you to remove just your tail light, leaving the strap mount installed on the seat post; ideal for when you leave your bike unattended or when it's time for a recharge. System Compatibility - Sentinel - Solas - Sabre - CherryBomb - TL 5.0 SL Not compatible with omega 300 and sentry aero 260 tail lights.

- Simplistic safety light combo pack designed to be seen - Easy to install silicone strap attachment is compatible with 22.2-31.8mm bars - Both lights feature 3 modes including 1 steady and 2 flashing modes - Powered by 2 CR2032 batteries each

The City Rover is a USB-rechargeable headlight with a powerful lithium-ion battery and a darkness destroying CREE LED bulb. Its precision reflector provides superior luminous guidance to the front and side for up to 20 hours of ride time. The City Rover will run for an additional 15 minutes in low-power safety mode after the low-battery indicator light comes on. - Additional 15 minutes in low-power safety mode after low-battery indicator light comes on - One second delayed power switch to prevent accidental on/off - Light wakes up in last mode used - Micro USB charging cord included; 5.5-hour charging cycle - 5 Modes (burn time): Steady High 500 Lumens 2 hours, Steady Medium 250 Lumens 4 hours, Steady Low 125 - Lumens 8 hours, Pulse 400 Lumens 16 hours, Daytime Flash 400 Lumens 36 hours

350 lumens packed into an unbelievably compact form, the all-new Hypershot 350 is the latest and greatest from the originators of the most powerful line of LED bike tail lights. This powerful dual LED tail light puts out ultra-bright 350 lumen flashes in an extra-wide and long-range beam pattern that makes cyclists stand out both day and night. The 2 button design on the Hypershot lets cyclists control the speed of each flash mode and the brightness of the steady mode to their preference. And with 7 unique lighting modes and a run time range of 2 to 200 hours (yes, really), you won’t go unnoticed. (patent pending) - Powerful 350 lumen flashes to be seen day and night - Unique 2-button design lets you adjust the speed of each flash mode and the brightness of the Steady mode - Dual LED optics throws a long-range, extra-wide beam - Daytime visible flashes make you stand out on busy streets - 7 lighting modes for day and night use (Steady - Zoom - SteadyPulse® - Bzzz Flash - Triple Flash - DayLightning® Flash - Random Flash) - SteadyPulse® mode features a steady beam to help motorists gauge their distance while overlapping pulses keep them alert at night - DayLightning® flash mode bursts lightning-like flashes to make you stand out in broad daylight on busy streets - Zoom mode signals those around you with gentle changes in brightness - All-new Bzzz Flash mode alerts those around you with highly visible fast buzz-like flashes - Hard seat post mount and seat stay mount securely attaches onto seat posts and seat stays - Light mode memory saves the mode you're in before the light is turned off - Durable and weighs only 60 grams - IP64 water-resistant for use in all weather conditions - USB rechargeable with 2 to 200 hours of run time and 3 hours fast charging - Low battery indicator alerts you when a charge is needed Patent pending. *Features and specs are subject to change without notice.

The NiteRider Tail Light Rack Mount gives you the option to mount your tail light directly onto your rack-ready/-equipped bike via this rack mount accessory. System Compatibility - Sentinel - Solas - Sabre - CherryBomb - TL 5.0 SL

The NiteRider Tail Light Mount – Seatstay and Seatpost is our classic seatpost mount design that gives riders the option to mount their tail light to their seat stay, using the included seat stay clamp. System Compatibility - Sentinel - Solas - Sabre - CherryBomb - TL 5.0 SL

Increase your line of sight with the NiteRider Lumina Helmet Mount. By mounting your head light onto your helmet, it’ll allow you to see farther into your turn or wherever your head turns. System Compatibility: - Lumina Series - MiNewt Mini Series - Mako Series

The Lezyne Zecto Drive Front is a compact safety light with three LEDs designed with a lightweight and sturdy Composite Matrix and CNC-machined aluminum body. It delivers a highly visible 250 lumens in Daytime Flash Mode. The Intelligent Power Indicator allows the user to check the power level at any time, and provides Side Visibility, allowing 180 degrees of visibility and increases user safety. It can recharge any time with a Micro USB cable for ultimate convenience. The light easily attaches via its Clip-On System, providing for versatile strapped or clipped mounting. The Lezyne Zecto Drive Rear complements its Front counterpart perfectly, delivering a highly visible 80 lumens in Daytime Flash mode. The Intelligent Power Indicator allows the user to check the power level at any time, and provide Side Visibility, allowing 180 degrees of visibility and increases user safety. It can recharge any time with a Micro USB cable for ultimate convenience. The light easily attaches via its Clip-On System, providing for versatile strapped or clipped mounting. The dedicated rear design points upward to ensure light is directed straight back.

Lezyne's Composite Bar Mount is a hard mount made of a reinforced Composite Matrix cradle for a strong and secure attachment of the Mega Drive, Deca Drive, and XL LED lights to the handlebar. It is designed for 25.4 mm or 31.8 mm bars, with the cradle designed to pivot 15 degrees laterally to allow adjustment of the LED light beam angle and directing it where it is most needed. A large thumb screw secures the CM mount to the bar without need of tools, and can be tightened by hand or a 1mm hex key. Molded rubber shims add grip and fine-tune fitting to undersized bars. Composite Bar Mounts are sold in a kit with the Mega Drive, Deca Drive, or XL LED lights.

Mount your tail light to the reflector tab on the back of a rear cargo rack with this Rack Bracket from Portland Design Works. - Compatible with all PDW rear lights except the Asteroid and Fenderbot - Horizontal holes are 50mm apart to fit European rack standards - Vertical holes are 18mm apart to fit most reflector mounts

- Compact, sleek design - Robust safety features including daytime and nighttime pulse modes - Side illumination ports allow cyclists to be seen when riding across traffic lanes - 6 modes including Daytime Pulse and Nightime Pulse - Fully USB rechargeable: no batteries to buy or replace - Memory function allows light to turn on at the last mode that was used - Power saving function automatically switches the light to the lowest lumen output when the battery gets to 10% power or less - Built-in battery indicator: red = lower than 25%, yellow = 50%-25%, green = fully charged - No tools bracket

- High brightness 16 chip COB style LED combo set - Perfect for increasing safety on commutes and neighborhood rides - 4 modes including 2 solid setting and 2 flash modes - USB rechargeable - cable included Modes: 4F/4R Mount: Rubber Strap Rechargable: UB Lumens: 60/30 Lumen Range: 1-100

NiteRider Lumina Max lights light up the night and are daylight visible with Cree LEDs and Max Boost mode. They're high-powered and feature a rugged design made with Dupont fiberglass-reinforced plastic body with integrated aluminum heatsinks. Max series lights feature NiteLink wireless connectivity with the Omega 300 taillight. - NiteLink Wireless Technology allows the rider to pair and simultaneously power on/off the headlight and Omega EVO 300 taillight wirelessly. (Taillight sold separately) - Multiple light modes including varying Steady and Safety Flashes - Handlebar mounting (Up to 35mm) with Quick Release Tab for easy light removal - CREE LEDs—the highest-performing LEDs on the market - Compatible with NiteLink Wireless Remote Switch (Sold separately) - Lumens: 2500 - Battery: Li-Ion - Recharge Type: USB

This PDW light set consists of the Pathfinder 200 lumen USB-rechargeable headlight and the Io USB-rechargeable taillight. The Pathfinder 200 has a powerful lithium-ion battery and a darkness-destroying CREE LED bulb. The Io has 3 different modes, steady, flash, and pulse, and is perfect for urban riding. - Headlight: 4 Modes: Steady low (4 hours), Steady high (2 hours), Pulse (8 hours), Daytime Flash (25 hours) - Headlight: Vertical Cutoff Beam focuses beam into perfect bike path pattern while shielding the LED to prevent blinding oncoming traffic - Taillight: Mounts vertically or horizontally - Taillight: 3 modes (runtime) Steady (10h) Flash (20h) Pulse (20h)

Let everyone know you're coming with CatEye's Omni 5 Front Light, which uses Omni Directional Technology for 360 degrees of visibility. Five super-bright LEDs light up in three different modes so you can customize the pattern and get run times up to 120 hours. Plus, CatEye's tool-free mount makes installation a breeze.

Stay clean and stay seen with Topeak's DeFender iGlow. It's a unique rear fender that has an integrated 0.5W light for safety at night or during low-visibility conditions. Strap this impact-resistant plastic fender down quickly and easily to the junction of your bike's seat and top tubes, and adjust it for perfect coverage. With constant and blinking modes, this light is ready when you are.

For seeing the road and staying safe, CatEye's EL135/Omni 3 Light Kit includes their fine EL135 headlight and Omni 3 taillight. To light the way, the compact headlight with its no-tools universal quick-release handlebar mount boasts 3 super-bright LEDs, constant and flashing modes, and CatEye's OptiCube lens technology for a wider, 150-candlepower beam with excellent visibility. Meanwhile, for the back, CatEye's Omni 3 with their FlexTight mount and included clothing clip can be placed almost anywhere and it uses their Omni Directional Technology for 360 degrees of visibility and boasts 3 ultra-bright LEDs plus constant, flashing and rapid modes.

Origin-8's Eyelet Stub Light Mount is an ingenious way to easily mount a light (or other accessory) to any bicycle frame with standard rack/fender eyelets. The Stub is made of light and tough 6061 aluminum tubing with an outside diameter of 26mm and an overall length of 46mm. It simply bolts to the eyelet with its included 5mm screw. There's a press-fit cap on the end to seal it.

Super bright and compact, Cateye's Omni 3 Front and Rear Safety Lights use CatEye's Omni Directional Technology for increased visibility. Three super-bright LEDs light up in three different modes so you can customize the pattern and extend the run time. Plus, CatEye's tool-free FlexTight mount makes installation easy.

Take your Light & Motion headlight off your handlebars and along with you wherever the path may lead. Soft fabric and full adjustable sizing make for a comfortable fit.

SP-12 Flex-Tight Seatpost Bracket for most CatEye taillights

- 32 lumen single LED safety light - 2 modes - steady and flashing - 2 CR2032 batteries included - Water resistant design

- Combo set of a 20 lumen headlight paired with an 8 lumen rear light - 2 x 0.5 watt LED`s per light - Built-in Li-Ion USB rechargeable battery - 3 modes each, 2 steady and 1 flash setting - Multi fit rubber strap attachment - Low battery indicator

- 20 lumen safety head light - Built in Li-Ion USB rechargable battery - 3 modes - 2 steady and 1 flashing setting - Multi fit rubber strap attachment - Low battery indicator

- 8 lumen safety tail light - Built in Li-Ion USB rechargable battery - 3 modes - 2 steady and 1 flashing setting - Multi fit rubber strap attachment - Low battery indicator

- 350 lumen XM-L LED - Built-in Li-Ion USB rechargeable battery - Low battery, charging, and fully charged indicator - Includes USB charging cable - 3 modes (2 Steady and 1 Flashing) - Multi-fit QR handlebar bracket - 2.2 ~ 6 hour run time per charge

NiteRider understand lights are an integral part of your daily commute. Using a light can mean the difference between being seen or not by automobile drivers. Many of the "entry level" commuter lights are nothing more than "be seen" lights. Your overall safety and visibility should not be limited by your budget, that's why NiteRider created the Mako Series. The Mako line offers three models and up to 250 lumens, not only allowing the cyclist to be seen, but allowing the cyclist to see as well. A favorite feature is the side "gills" that emits light, it not only looks cool, but makes the Makos more visible. The Mako line is easy on the wallet and easy to operate. - Side lights - Economical, high output light - Super bright flash setting ideal for daylight use - Easy operation battery operated (comes with 2 x AA) - 3 light settings – High, Low and Flash - Lumen Output: 150 - Run Time: 18:00 – 72:00hrs - Weight: 175g - Battery: Alkaline AA x 2 WARRANTY The Mako 150 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Light Head - Handlebar Mount - 2 AA Alkaline Batteries

- Compact, sleek design - Robust safety features including daytime and nighttime pulse modes - Side illumination ports allow cyclists to be seen when riding across traffic lanes - 6 modes including Daytime Pulse and Nightime Pulse - Fully USB rechargeable: no batteries to buy or replace - Memory function allows light to turn on at the last mode that was used - Power saving function automatically switches the light to the lowest lumen output when the battery gets to 10% power or less - Built-in battery indicator: red = lower than 25%, yellow = 50%-25%, green = fully charged - No tools bracket - Sold with Avenue R-45 rear taillight - Rear light includes 5 modes - Side illumination ports