Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Parts & Accessories

$18.99
New pads help your helmet fit best and smell fresh
Let's face it - we all sweat. Sweat stinks. Fresh pads will make your helmet smell, and fit, just like it did when it was new.
- Original equipment replacement fit pads for your Bontrager Specter WaveCel helmet
- Helmet fit pads should be replaced once a year to maintain fit and hygiene

$4.99
- Made in the USA
- Enables Take a Look Original Eyeglass Mirror to fit helmets
- Does not work with Take a Look Compact Eyeglass Mirror

$29.99
Replacement fit systems keep you comfy and secure
Fit systems work hard to keep your helmets secure and to maximize safety. No matter what happens, these original replacements will get them working like new
- Original equipment replacement Boa System for your Bontrager WaveCel helmet
- Not compatible with non-WaveCel helmets
- Full-length fit system designed for use with Medium and Large sized helmets
- Short length fit system designed to optimize the fit of Small sized helmets

$14.99
Replacement visors keep your lids fresh
Helmet visors work hard to get the sun out of your eyes and keep you looking good. No matter what happens, these original replacements will get them working like new.
- Works perfectly with your Bontrager Blaze WaveCel helmet
- Original equipment replacement visor

$2.99
Bontrager's LockDown strap dividers are essential for a great fitting, secure helmet. No matter what happens, these original replacements will get them working like new.
Key features:
- Original replacement strap dividers for your Bontrager helmet
- Compatible with all Bontrager helmets equipped with LockDown Straps

$19.99
Easily integrated
Designed specifically for specific Bontrager Circuit MIPS road bike helmets, the Blendr mount easily integrates Bontrager Ion lights and GoPro cameras.
- Quickly mount front light and camera accessories on the front of your Bontrager Circuit MIPS road bike helmet.
- Tested with an accelerometer for intended breakaway point if involved in a crash

$26.99
New pads help your helmet fit best and smell fresh
Let's face it—we all sweat. Sweat stinks. Fresh pads will make your helmet smell, and fit, just like it did when it was new.
- Original equipment replacement fit pads for your Bontrager Blaze WaveCel helmet
- NoSweat keeps sweat out of eyes through channeled pads for constant clarity
- Helmet fit pads should be replaced once a year to maintain fit and hygiene

$14.99
Helmet visors work hard to get the sun out of your eyes and keep you looking good. No matter what happens, these original replacements will get them working like new.
- Works perfectly with your Bontrager Solstice helmets including Youth models
- Original equipment replacement visor

$6.99
Freshen up the interior of your helmet with a new pad set!
- Replacement pads for Sphere helmets
- Attachment: Velcro
- Material: Foam

$10.99
Let's face it - we all sweat. Sweat stinks. Fresh pads will make your helmet smell, and fit, just like it did when it was new.
New pads can also help you dial in the perfect fit - keeping you comfortable and looking forward to the next ride.
Key features
- Original equipment replacement fit pads for your Bontrager Specter helmet
- Helmet fit pads should be replaced once a year to maintain fit and hygiene

$3.99
Let's face it - we all sweat. Sweat stinks. Fresh pads will make your helmet smell, and fit, just like it did when it was new.
New pads can also help you dial in your perfect fit - keeping you comfortable and looking forward to the next ride.
- Original equipment replacement fit pads for your Bontrager Dipper helmet
- Helmet fit pads should be replaced once a year to maintain fit and hygiene

$24.99
Keep the rain, snow and mud from getting inside your helmet, or use as a quick aerodynamic solution to close off the front and side vents. Aeroshell is a great accessory for compatible Lazer helmets!
The Aeroshell is a plastic cover, designed to fit perfectly over specific models of Lazer helmets. The Aeroshell snaps into place and protects the riders head from wind and rain while still allowing for some air movement under the front of the helmet and out the rear vents. The Aeroshell is unique in that it is easily removed from the helmet when riding conditions are such that additional ventilation is desired. Snap it on when the rain is pouring down and pull it off when the sun starts to shine, the Aeroshell is the perfect tool for every possible condition. Additionally, the Aeroshell provides a significant increase in Aerodynamic performance once it is installed on the helmet. By closing off the ventilation holes, the amount of aerodynamic drag the helmet creates is strongly reduced, making your road helmet into an aero helmet and resulting in a faster ride.
- COMPATIBILITY: Z1 MIPS, Z1
- ATTACHMENT: Z1 helmet
- WEIGHT: 45g
- MATERIAL: Polycarbonate

$22.99
Keep the rain, snow and mud from getting inside your helmet, or use as a quick aerodynamic solution to close off the front and side vents. Aeroshell is a great accessory for compatible Lazer helmets!
The Aeroshell is a plastic cover, designed to fit perfectly over specific models of Lazer helmets. The Aeroshell snaps into place and protects the riders head from wind and rain while still allowing for some air movement under the front of the helmet and out the rear vents. The Aeroshell is unique in that it is easily removed from the helmet when riding conditions are such that additional ventilation is desired. Snap it on when the rain is pouring down and pull it off when the sun starts to shine, the Aeroshell is the perfect tool for every possible condition. Additionally the Aeroshell provides a significant increase in Aerodynamic performance once it is installed on the helmet. By closing off the ventilation holes, the amount of aerodynamic drag the helmet creates is strongly reduced, making your road helmet into an aero helmet and resulting in a faster ride.
Sizing:
- Small = 52 – 56cm
- Medium = 55 – 59cm
- Large = 58 – 61cm

$14.99
Visor for Impala helmet
COMPATIBILITY
- Impala MIPS
- Impala
- ATTACHMENT: Direct Mount
- WEIGHT: 45g
- MATERIAL: Nylon

$11.99
A helmet mounted taillight is an ideal way to help make sure you are seen in low light conditions
LED light for Lazer TSPLUS retention system
COMPATIBILITY
- Tonic MIPS
- Tonic
- Tardiz2
- Coyote MIPS
- Coyote
- Chiru MIPS
- Next+
- Compact DLX MIPS
- Compact DLX
- Compact
- BATTERY TYPE: CR2032 button battery
- RUN TIME: 37 hours
- LUMENS: 4 lumens
- ATTACHMENT: TS+ mechanism
- WEIGHT: 12g
- MATERIAL: LED light

$39.99
Magnetic mount lens for Lazer Bullet 2.0 helmet.
The integrated lens is an integral part of the Bullet 2.0 helmet. It can be stored on the helmet surface using the magnetic docking when not in use.
- COMPATIBILITY: Bullet 2.0
- ATTACHMENT: magnetic
- WEIGHT: 24g
- MATERIAL: Polycarbonate

$6.99
Let's face it - we all sweat. Sweat stinks. Fresh pads will make your helmet smell and fit just like it did when it was new.
Key features
- Original equipment replacement fit pads for Bontrager Dipper MIPS helmets
- Not compatible with non-MIPS Bontrager Dipper helmets
- Helmet fit pads should be replaced once per year to maintain fit and hygiene

$26.99
New pads help your helmet fit best and smell fresh
Let's face it—we all sweat. Sweat stinks. Fresh pads will make your helmet smell, and fit, just like it did when it was new.
- Original equipment replacement fit pads for your Bontrager XXX WaveCel helmet
- NoSweat keeps sweat out of eyes through channeled pads for constant clarity
- Helmet fit pads should be replaced once a year to maintain fit and hygiene

$10.99
Let's face it - we all sweat. Sweat stinks. Fresh pads will make your helmet smell, and fit, just like it did when it was new.
- Original equipment replacement fit pads for your Bontrager Lithos or Rally helmet
- Helmet fit pads should be replaced once a year to maintain fit and hygiene

$10.99
New pads can help you dial in your perfect fit - keeping you comfortable and looking forward to the next ride.
New pads help your helmet fit best and smell fresh
Let's face it - we all sweat. Sweat stinks. Fresh pads will make your helmet smell and fit just like it did when it was new.
Key features
- Original equipment replacement fit pads for your Bontrager Circuit MIPS helmet
- Also compatible with non-MIPS Bontrager Circuit helmet
- Helmet fit pads should be replaced once per year to maintain fit and hygiene

$139.99
Taking the ultimate helmet lighting system – the Vis 360 – to the next level, the Vis Pro features an ultra-powerful 600-lumen headlight optimized for commuting and bright enough for twisty singletrack! The featherweight system is waterproof for all-conditions reliability and has an integrated rear light/battery pack that balances the unit on a variety of helmets. An essential setup for those requiring maximum protective visibility with powerful illumination.
Featuring:
- 600 Lumen Output Certified to the FL-1 Standard
- Daylight Visible Pulse Mode
- Integrated Battery Pack With Red Rear Lighting
- Innovative Amber Sidelights Provides Critical Side Visibility at Intersections
- Ultra-lightweight Setup With Easy Clip On/Off Design
- Waterproof to 1 meter For All-Conditions Reliability
- Accurate Battery Charge & Status Indicator
- Micro USB Rechargeable
Included:
- Helmet Mounts & Micro USB Charging Cable

$34.99
A helmet mounted taillight is an ideal way to help make sure you are seen in low light conditions
The Lazer Universal LED mounts directly to any Lazer KinetiCore helmet. It can mount to any other helmet by using the included Velcro strap.
COMPATIBILITY
- Cityzen KinetiCore
- Jackal KinetiCore
- Nutz KinetiCore
- Pnut KinetiCore
- Strada KinetiCore
- Vento KinetiCore
- BATTERY TYPE: USB rechargeable
- RECHARGE TIME: 2.5 hours
- RUN TIME: 54 hours
- LUMENS: 40 lumens
- ATTACHMENT: Direct mount to Lazer KinetiCore helmets. Velcro mount to any helmet.
- WEIGHT: 15g

$18.99
$19.99
5% Off
Product Details
Give your helmet Some attitude!
Soft Flexible material
Works on most helmets
Hook & Loop will hold to over 200 mph
Can be cut to desired length

$18.99
New pads help your helmet fit best and smell fresh
Let's face it - we all sweat. Sweat stinks. Fresh pads will make your helmet smell, and fit, just like it did when it was new.
- Original equipment replacement fit pads for your Bontrager Charge WaveCel helmet
- Helmet fit pads should be replaced once a year to maintain fit and hygiene

$31.99
Key features
- Original equipment replacement Boa System for your Bontrager helmet
- Compatible with all Boa-equipped Bontrager helmets, except Velocis MIPS
- Can also be used to upgrade your Headmaster-equipped Bontrager helmet to the Boa System

$18.99
New pads help your helmet fit best and smell fresh
Let's face it—we all sweat. Sweat stinks. Fresh pads will make your helmet smell, and fit, just like it did when it was new.
- Original equipment replacement fit pads for your Bontrager Blaze WaveCel helmet
- Helmet fit pads should be replaced once a year to maintain fit and hygiene

$18.99
New pads help your helmet fit best and smell fresh
Let's face it—we all sweat. Sweat stinks. Fresh pads will make your helmet smell, and fit, just like it did when it was new.
- Original equipment replacement fit pads for your Bontrager XXX WaveCel helmet
- Helmet fit pads should be replaced once a year to maintain fit and hygiene

$65.00
You need to get out on your bike even in terrible weather. Fitting in an early commute or a mid-winter ride is easier when you're warm, comfortable, and visible. Keeping your head warm in bad weather can be the best way to fend off the elements.
- GORE-TEX Product: durably waterproof, windproof and extremely breathable
- Reflective band
- Elastic hem
- Reflective logo
- Durably waterproof
- Extremely breathable
- All weather conditions
- Engineered for Cycling
- Weight: 0.8 ounces
Page 1 of 2
Next page